S P E C F I L E
LCD Projector
PT-F200
Computer data compatibility
This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock.
NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 110 MHz. The display resolution of this projector is 1,024 x 768 pixels. If the display resolution indicated in the above data exceeds this resolution, image compression will be used to con- vert the input signal to 1,024 x 768 pixels.
List of compatible signals
Display mode | Display | Scanning frequency | Dot clock | Picture | Input terminal | |
| resolution | H | V | frequency quality 2 |
| |
| (dots)1 | (kHz) | (kHz) | (MHz) |
|
|
720 x 480i | 15.7 | 59.9 | - | A | ||
720 x 576i | 15.6 | 50.0 | - | A |
| |
525i (480i) | 720 x 480i | 15.7 | 59.9 | 13.5 | A | COMPONENT (YPBPR)/ |
625i (576i) | 720 x 576i | 15.6 | 50.0 | 13.5 | A | COMPUTER (RGB only) |
525p (480p) | 720 x 480 | 31.5 | 59.9 | 27.0 | A |
|
625p (576p) | 720 x 576 | 31.3 | 50.0 | 27.0 | A |
|
750 (720)/60p | 1,280 x 720 | 45.0 | 60.0 | 74.3 | A | COMPONENT (YPBPR)/ |
750 (720)/50p |
| 37.5 | 50.0 | 74.3 | A | COMPUTER (RGB only) |
1125 (1080)/60i | 1,920 x 1,080i | 33.8 | 60.0 | 74.3 | A | COMPONENT (YPBPR)/ |
1125 (1080)/50i |
| 28.1 | 50.0 | 74.3 | A | COMPUTER (RGB only) 3 |
VESA70 | 640 x 400 | 31.5 | 70.1 | 25.2 | A | COMPUTER (RGB only) |
VESA85 |
| 37.9 | 85.1 | 31.5 | A |
|
VGA60 | 640 x 480 | 31.5 | 59.9 | 25.2 | A |
|
VGA65 |
| 35.0 | 66.7 | 30.2 | A |
|
VGA72 |
| 37.9 | 72.8 | 31.5 | A |
|
VGA75 |
| 37.5 | 75.0 | 31.5 | A |
|
VGA85 |
| 43.3 | 85.0 | 36.0 | A |
|
SVGA55 | 800 x 600 | 35.2 | 56.3 | 36.0 | A |
|
SVGA60 |
| 37.9 | 60.3 | 40.0 | A |
|
SVGA70 |
| 48.1 | 72.2 | 50.0 | A |
|
SVGA75 |
| 46.9 | 75.0 | 49.5 | A |
|
SVGA85 |
| 53.7 | 85.1 | 56.3 | A |
|
MAC16 | 832 x 624 | 49.7 | 74.6 | 57.3 | A |
|
XGA50 | 1,024 x 768 | 39.6 | 50.1 | 51.9 | AA |
|
XGA60 |
| 48.4 | 60.0 | 65.0 | AA |
|
XGA70 |
| 56.5 | 70.1 | 75.0 | AA |
|
XGA75 |
| 60.0 | 75.0 | 78.8 | AA |
|
XGA85 |
| 68.7 | 85.0 | 94.5 | AA |
|
WIDE750 (720) | 1,280 x 720 | 44.8 | 59.9 | 74.5 | A |
|
|
| 37.1 | 49.8 | 60.5 | A |
|
WXGA768/50 | 1,280 x 768 | 39.6 | 49.9 | 65.3 | A |
|
WXGA768/60 |
| 47.8 | 59.9 | 79.5 | A |
|
WXGA800/50 | 1,280 x 800 | 41.3 | 50.0 | 68.0 | A |
|
WXGA800/60 |
| 49.1 | 60.2 | 69.1 | A |
|
|
| 49.7 | 59.8 | 83.5 | A |
|
MXGA70 | 1,152 x 864 | 64.0 | 71.2 | 94.2 | A |
|
MXGA75 |
| 67.5 | 74.9 | 108.0 | A |
|
MXGA85 |
| 76.7 | 85.0 | 121.5 | B |
|
MAC21 | 1,152 x 870 | 68.7 | 75.1 | 100.0 | A |
|
MSXGA60 | 1,280 x 960 | 60.0 | 60.0 | 108.0 | A |
|
SXGA60 | 1,280 x 1,024 | 64.0 | 60.0 | 108.0 | A |
|
SXGA75 |
| 80.0 | 75.0 | 135.0 | B |
|
SXGA85 |
| 91.1 | 85.0 | 157.5 | B |
|
SXGA60+ | 1,400 x 1,050 | 64.0 | 60.0 | 108.0 | A |
|
|
| 65.1 | 59.9 | 122.4 | B |
|
WXGA+ | 1,440 x 900 | 55.9 | 59.9 | 106.5 | A |
|
UXGA60 | 1,600 x 1,200 | 75.0 | 60.0 | 162.0 | B |
|
WSXGA+ | 1,680 x 1,050 | 65.3 | 60.0 | 146.3 | B |
|
WUXGA | 1,920 x 1,200 | 74.6 | 59.9 | 193.3 | B |
|
1.The “i” appearing after the resolution indicates an interlaced signal.
2.The following symbols are used to indicate picture quality.
AA:Maximum picture quality can be obtained. A: Signals are converted by the image processing circuit before picture is projected.
B:Pixels are thinned by the image processing circuit before picture is projected.
3.When 750 (720)/60p or 750 (720)/50p signals are input to a computer input terminal, images are projected in the WIDE750 (720) format. Be sure to run the auto setup function.
As of October 2008 |
| < 6 > |
