Accessories

Check that all of the accessories shown below have been included with your projector.

Card remote control unit

Lithium battery for

RGB signal cable

(TNQE239 x1)

remote control unit

[1.8 m (5´10˝),

 

(CR2025 x1)

K1HA15DA0002 x1]

POWER

INPUT

VIDEO RGB

AUTO

SETUPMENU

 

ENTER

 

 

 

 

Power cord

Carrying bag

FREEZE

SHUTTER

(K2CG3DR00005 x 1)

(TPEP009 x 1)

STD

VOLUMED.ZOOM

INDEX

WINDOW

PROJECTOR

Before use

Caution when moving the projector

Be sure to attach the lens cover before moving the projector.

The projection lens is extremely susceptible to vibration and shocks. When moving the projector, use the accessory carrying bag. When placing the projector inside the carrying bag, position it so that the lens is facing upward. Do not put anything else in the bag other than the projector and the cables.

Cautions regarding setting-up

Avoid setting up in places which are subject to vibration or shocks. The internal parts can be damaged, which may cause malfunctions or accidents.

Do not set up the projector near high-voltage power lines or near motors.

The projector may be subject to electromagnetic interference.

If installing the projector to the ceiling, ask a qualified technician to carry out all installation work.

You will need to purchase the separate installation kit (Model No.ET-PKC80). Furthermore, all installation work should only be carried out by a qualified technician.

If using this projector at high elevations (above 1 400 m), set the “FAN CONTROL” to “HIGH”. (Refer to page 45.)

Failure to observe this may result in malfunctions.

Preparation

10-ENGLISH

ENGLISH-11