Do not look into the lens while the projector is being used.

BStrong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

BBe especially careful not to let young children look into the lens. In addition, disconnect the power cord when you are away from the projector.

Do not place your hands or other objects close to the air outlet port.

BHeated air comes out of the air outlet port. Do not place your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result.

Replacement of the lamp unit should only be carried out by a qualified technician.

BThe lamp unit has high internal pressure. If improperly handled, explosion might result.

BThe lamp unit can easily become damaged if struck against hard objects or dropped, and injury or malfunctions may result.

When replacing the lamp, allow it to cool for at least one hour before handling it.

BThe lamp cover gets very hot, and touching it can cause burns.

Before replacing the lamp, be sure to disconnect the power cord from the wall outlet.

BElectric shocks or explosions can result if this is not done.

Caution

Do not cover the air inlet port or the air outlet port.

BDoing so may cause the projector to overheat, which can cause fire or damage to the projector.

BDo not place the projector in narrow, badly ventilated places such as closets or bookshelves.

BDo not place the projector on cloth or papers, as these materials could be drawn into the air inlet port.

Do not set up the projector in humid or dusty places or in places where the projector may come into contact with smoke or steam.

BUsing the projector under such conditions may result in fire or electric shocks.

When disconnecting the power cord, hold the plug, not the lead.

BIf the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks may result.

Always disconnect all cables before moving the projector.

BMoving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur.

Do not place any heavy objects on top of the projector.

BFailure to observe this may cause the projector to become unbalanced and fall, which could result in damage or injury.

8-ENGLISH