Projecting

Check the connections of the peripheral devices and connection of the power cord (Æpage 26) and switch on the power (Æpage 28) to start the projector. Select the image and adjust the state of the image.

Selecting the image

Select an input signal.

The image selected with the <COMPUTER 1>, <COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>, or <COMPONENT> button is projected (Æpage 32).

Attention

zzImages may not be projected properly depending on the connected device and DVD, video tape, etc. to be played. Select a system format that is suitable for the input signal in [Component] or [RGB] in the [Input] menu (Æpage 39).

zzCheck the aspect ratio of the screen and the image and select the optimum aspect ratio under the [Screen] menu (Æpage 48).

How to adjust the state of the image

1111Adjust the projection angle.

zzFor details, see “Adjusting front adjustable feet”. (Æpage 24)

2222Adjust the focus.

Turn [focus lever] to adjust the image.

Focus Lever

Note

zzIt is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.

zzIf keystone distortion occurs, see “KEYSTONE” (Æpage 49).

Basic Operation

ENGLISH - 31