6
I
NSTALLATION
Optional Equipment Connections

VCR Connection

Follow this diagram when connecting your television to a VCR only.

Note: The remote control must be programmed with supplied codes to operate the VCR. Se e

Programming the Remote Control in the Remote Control Quick Reference Guide.

Viewing a television program

Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Prog ram Channels).
2. Tune the television to the television program you want to view.

Viewing a video

Procedure
Option A
1. Select ANT1 in the SET UP menu under Prog Chan (Prog ram Channels).
2. Press the TV/VIDEO button on the remote control to select the video input (VIDE O 1,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
Option B
1. Select ANT2 in the SET UP menu under Prog Chan (Prog ram Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.

Recording a television program

Procedure
Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan (Prog ram Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan (Prog ram Channels).
2. Press the TV/VIDEO button on the remote control to select the video input (VIDE O 1,
VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view.
VCR
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV
S-
VIDEO
VIDEO
AUDIO
L
R
VIDEO
Y
PB
PR
PROG
OUT TO
AMP
L
R
INPUT
1INPUT
2INPUT
3
COMPONENT
ANT 1
ANT 2
SPLIT OUT
CENTER
12 50 WATTS (DIN) MAX.Ω
12
CHANNEL
INPUT
AUDIO
VIDEO INPUTS
L
R
AUDIO OUT
VIDEO OUT
ANT INANT OUT
Incoming
Cable