About your projector

Projector body

■Top and front view

Color sensor window However, this projector is not equipped with a color sensor.

Temperature indicator

Lamp indicator

Power indicator

Air exhaust port

Remote control signal receiver

Projection lens

Lens cover

Protects the projection lens from dust and dirt. Attach the lens cover when

not using the device.

Attention

zzDo not place your hands or objects close to the exhaust port.

3D Eyewear transmitter

- Do not place hands or face near.

- Do not place near objects that are intolerant to heat.

Transmits a signal for

- Inserting fingers may result in injury.

3D Eyewear (optional

Hot air is expelled from the exhaust port and can cause burns,

accessory) while viewing

injuries, and deformation.

3D video. (May appear as

 

a red dot when seen in a

dark area.)

Air intake port / Air filter cover

Control panel

Lens shift lever

Lens shift cover

When the lens shift cover is closed

Preparation

Attention

 

Opening the lens shift

zzEnsure that there are no build ups of dirt on the air intake and exhaust ports.

cover

zzDo not place objects in front of the transmitter for the 3D Eyewear.

Press the cover and

This may lead to the 3D Eyewear not operating correctly.

slide.

 

■Control panel

Power button

With the <MAIN POWER> switch of the projector turned <ON>, switch between the standby mode and projection mode.

Adjust the focus

Switch input

Use for menu screen operation

Adjust the size of the image

ENGLISH - 19