Before using
20
LSQT0860
6Move the joystick up or down in order to
select the item to be set.
7Press the joystick to determine the setting.
ªTo exit the menu screen
Press the [MENU] button.
ªTo get back to the previous screen
Move the joystick left.
ªAbout the menu setting
≥The menu screen does not appear during
recording. And you cannot record when the
menu screen appears.
ªOperating with remote control
The menu screen transition is the same as when
the buttons on the main unit are used.
1Press the [MENU] button.
2Select a menu item.
≥Use the direction buttons (π,∑,∏,∫) and
[ENTER] button in place of the joystick on the
main unit.
3Press the [MENU] button, to exit the menu
screen.
Setting date and time
If the screen shows the incorrect date/time, then
adjust it.
≥Set to Tape Recording Mode or Card
Recording Mode.
1Set [BASIC] >> [CLOCKSET] >> [YES].
2Move the joystick left or right in order to
select the item to be set. Then move the
joystick up or down to set the desired value.
≥The year will change as follows:
2000, 2001, ..., 2089, 2000, ...
≥The 12-hour clock is used.
3Press the joystick to determine the setting.
≥The clock function starts at [00] seconds.
ªAbout date/time
≥The date and time function are driven by a
built-in lithium battery.
≥Make sure to check the time before recording
because the built-in clock is not very accurate.
ªRecharging the built-in lithium battery
≥If [0] or [--] is indicated when the Camcorder is
turned on, then the built-in lithium battery has
run down. Connect the AC adaptor to the
Camcorder or place the battery on the
Camcorder, and the built-in lithium battery will
be recharged. Leave the Camcorder as is for
approx. 24 hours, and the battery will drive the
date and time for approx. 6 months. (Even if the
[OFF/ON] switch is set to [OFF], the battery is
still being recharged.)
ENTER
VAR.
SEARCH
MENU
ENTER
VAR.
SEARCH
MENU
ENTER
VAR.
SEARCH
MENU
LSQT0860ENG.book 20 ページ ２００４年１２月２２日　水曜日　午後２時３８分