19
12
4
3
1
3
24
1
5
Lens Cap and Easy-Grip Strap
ªAttach the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1Pass the end of the Lens Cap Cord through the hole
in the Easy-Grip Strap Attachment part and the Lens
Cap through the Lens Cap Cord.
≥The removed Lens Cap can be hooked onto the Easy-Grip Strap
1. (When you are not recording, be sure to keep the Lens Cap
attached to the Lens for protection.)
ªAdjust the Easy-Grip Strap
Adjust the length of the Easy-Grip Strap to the size of your hand.
1Detach the tip of the Easy-Grip Strap and adjust the
length of it.
2Reattach the tip of the Easy-Grip Strap.
ªTo Use as a Free Style Easy-Grip Strap
Using the Easy-Grip Strap as the Free Style Easy-Grip Strap makes
it easier to handle and carry the Palmcorder. 1 It is also convenient
when used in combination with the MagicWire Remote Control with
Narration Mic.
1
Open the Lock Cover 2 by holding tabs 3 on both
sides.
2
Keep pressing on the Lock Button 4 and pull it off.
≥Hold the Palmcorder securely.
≥Close the Lock Cover 2 after pulling off.
3
Slide the pad of the Easy-Grip Strap.
4
Attach the Easy-Grip Strap around your wrist.
When re-attaching the Grip Belt Attachment to the Palmcorder
1Push until it locks with a click.
≥To prevent from getting unlocked accidentally, press on 5 and
mount securely.
1
1
1
2
PV-GS70P.book 19 ページ ２００３年３月１４日 金曜日 午前９時２０分