21
3 180x
4 90x
3
1, 2
SELF
TIMER
TELE
MACRO
SELF
TIMER
TELE
MACRO
SOFT
SKIN
COLOR
NIGHT
VIEW
STILL
12
2
1
PUSH
OPEN
O
F
F
O
N
M
O
D
E
Using the Viewfinder
Before using the Viewfinder, adjust the field of view so that the
displays inside the Viewfinder become clear and easy to read.
1Tilt up the Viewfinder.
≥The Viewfinder can also be pulled out for use.
≥Do not pull on the Eyecup to extend the Viewfinder.
2Adjust the Viewfinder by sliding the Eyepiece
Corrector Knob 1.
Using the LCD Monitor
With the LCD Monitor open, you can also record the picture while
watching it.
1Set the [OFF/ON/MODE] Switch to [ON].
2Press the [PUSH OPEN] Button 2 and, at the same
time, bring out the LCD Monitor about 90x in the
direction of the arrow.
≥The Viewfinder goes off.
3Adjust the LCD Monitor angle according to the
desired recording angle.
≥The LCD Monitor can rotate a maximum of 180x 3 from the
vertical position to the upward direction and a maximum of 90x
4 to the downward direction. Forcefully rotating the LCD
monitor beyond these ranges will damage the Palmcorder.
Closing the LCD monitor
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
ªAdjusting Brightness and Color Level
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to
[YES], the following items are displayed:
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
Adjust the brightness of the image in the Viewfinder.
1
Press the [PUSH] Dial and select the item you want to
adjust.
2
Rotate the [PUSH] Dial and increase or decrease the
number of the vertical bars on the Bar Indication.
≥The Bar Indication has 8 steps. A larger number of vertical
bars indicates stronger brightness or color saturation.
Increasing the Brightness of the Entire LCD Monitor
Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to
[BRIGHT].
To change the Picture Quality of the LCD Monitor
Set the [LCD AI] on the [DISPLAYSETUP] Sub-Menu to [ON] or
[OFF].
[ON]: The screen image becomes clear and vivid. (The effect varies
according to the recording scene.)
≥These adjustments do not affect the recorded images.
≥For other notes, see page 96.
LCD/EVF SET
PUSH MENU TO RETURN
LCD BRIGHTNESS
LOW||||----HIGH
LCD COLOR LEVEL
LOW||||----HIGH
EVF BRIGHTNESS
LOW||||----HIGH
PV-GS70P.book 21 ページ ２００３年３月１４日 金曜日 午前９時２０分