Playback
1 Press [$FOLDER /%MENU] to select the folder.
2 Press [:,9] to select the file.
Information about the selected file appears in the following order:
1Date of recording
2 Time of recording
3 Length of recording
4 Number of files
3 Press [1]. | HQ | |
| ||
Playback starts. | B | |
Play time |
|
|
|
| |
4 Adjust the volume. | H MS | |
| ||
∫To stop play
Press [STOP] or [∫]. Press [1] to resume play from where you stopped it.
∫To move to other files during play
Press [:,9].
∫Fast forward and rewind
Press and hold [:,9]. You can fast forward and rewind not only within a file, but the previous and the following files as well.
Note .
Volume may be changed after fast forwarding, rewinding, and stopping.
∫ To check the remaining playback time | HQ |
Press [$FOLDER /%MENU] during play.
Press again to restore the display. | B |
H M S
∫To listen to the first 5 seconds of each file (Intro-scan)
1 Press [$FOLDER /%MENU] to select the folder. 2 Press and hold [1] while stopped .
If you want to listen to a file in full, press [1] while it is playing.
∫To change playback speed
1Press and hold [$FOLDER /%MENU] while stopped.
2Within 10 seconds, press [$FOLDER /%MENU] until “SPEEd” is displayed.
3Within 10 seconds, press[:,9] to select the speed.
Slow |
| Normal |
| Fast | |
SLOW | FAST | SLOW | FAST | SLOW | FAST |
0 ・ 50 | ・ 100 | 0 ・ | 50 ・ 100 | 0 ・ | 50 ・ 100 |
4Within 10 seconds, press [1].
The speed is selected.
For your reference
Press and hold [STOP] or [∫] to restore normal playback speed.
∫ Using earphone | Plug in firmly. |
(not included) | # |
Sound will not be heard from the speaker.
Plug type: 3.5 mm (1⁄8 in.) monaural
Turning the operation tone on and off
A tone sounds each time an operation is performed if you select “On”.
1Press and hold [$FOLDER /%MENU] while stopped.
2 Within 10 seconds, press [$FOLDER / %MENU] until “bEEP” is displayed.
3Within 10 seconds, press [9] to select
“On” (factory setting) or [:] to select “OFF”.
4Within 10 seconds, press [1].
6
Editing
FOLDER/
MENU
ERASE
∫Erasing files
1Press [$FOLDER/ %MENU] to select the folder.
2Press and hold [ERASE].
ERASE
B 
3 Within 10 seconds, press [:,9] to select the file.
The display changes in the following order:
ERASE | ERASE | |
B | B | |
The first file | The last file | |
ERASE | ERASE | |
A B | B | |
C D | ||
| ||
All folders | All files |
4Within 10 seconds, press [ERASE].
The selected file is erased.
Note .
≥Locked files will not be erased (see below).
≥Total recording time can be reduced after erasing a number of files. Remedy this by erasing all the folders occasionally.
≥Erased files cannot be recalled.
∫Locking files
1Press [$FOLDER /%MENU] to select the folder.
2Press and hold [$FOLDER /%MENU].
LOCK
B
3Within 10 seconds, press [:,9] to select the file.
4Within 10 seconds, press [1].
To unlock:
1 Select the locked file.
2 Repeat steps 2 and 4 for each file.
∫Moving files
1 Press and hold [$FOLDER /%MENU] during play. 2 Press [$FOLDER /%MENU]
to select the folder you want |
|
| ||
to move the file to. |
|
| ||
Present folder |
|
|
| A |
|
| |||
New folder |
| C | ||
|
|
| ||
Number of files |
|
| ||
in new folder |
|
| ||
3Within 10 seconds, press [1].
7 | RQT6222 |
