RQT6243
20
Listening operations
Sound quality/sound field operations
Enjoying surround sound
DOLBY DIGITAL
Preparation: Do step 1 on page 27, A..
Play a DOLBY DIGITAL source from the
external unit.
“p DIGITAL” is displayed.
DOLBY PRO LOGIC
1Press [p PL] to select “NORMAL” OR
“PHANTOM”.
Every time you press the button:
NORMAL → PHANTOM
↑ Light off (off) ←
NORMAL: To output at the front, surround and center
speakers
PHANTOM: To output at the front and surround speakers
(sound which would have been sent to the center
speaker will be divided equally between both the
left and right front speakers.)
2Playback a Dolby Surround source.
The program format indicators (L, C, R, LS, S, LFE, RS)
These light up to indicate the channels contained in the digital input
signal. They do not light when input is analog.
L: Front left
C: Center
R: Front right
RS: Right surround
LS: Left surround
S: If the surround channel is monaural
LFE (Low Frequency Effect): Deep-bass effect
Changing the recognition mode
In rare cases, the unit may have trouble recognizing the digital
signals on the discs. With the PCM signals on CDs, this may cause
the beginning of a track to be cut off. Engage the PCM FIX mode if
this occurs.
This mode does not need to be changed under normal
circumstances. Change it only if the unit appears to be having
trouble recognizing the software you are playing.
While the input source is selected and digital input is engaged:
Press and hold [DIGITAL INPUT 1/2].
Every time you press and hold the button:
PCM FIX ↔ AUTO
When PCM FIX mode is on, the unit cannot process other signals.
This may cause noise to be output. Select “AUTO” if this occurs.
The selected mode is stored even if the unit is turned off.
A
B
C
B
A
C
DIGITAL
INPUT 1/2
pPL
PL
PL
DIGITAL
INPUT 1/2
1