Timers and others
➡Page 2 for the position of remote control buttons.
Setting the time
This is a
Press [CLOCK/TIMER] to set the clock.
Press [2/u] or [1/i] to select the time within 5 seconds. (Press and hold to change the time faster.)
Press [CLOCK/TIMER] again.
g To display the clock when the unit is on | Press [CLOCK/TIMER] |
g To check the time when the unit is off | Press [CLOCK/TIMER] |
Note |
|
The clock is accurate to within ±60 seconds a month. Readjust if necessary. | |
Set again after disconnecting the AC power supply cord or power failure. | |
Sleep timer
The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function ON/OFF.
•Each time you press the button:
30 MIN 
60 MIN 
90 MIN 
120 MIN
OFF (Canceled) ![Press [PRESET EQ] to select the sound quality.](/images/new-backgrounds/11620/1162011xi6.webp){kind=small}
g To check the remaining time | Press [SLEEP] once |
|
|
Note
The play timer and sleep timer can be used together. The sleep timer always has priority. Be sure not to overlap timer settings.
Sound quality
You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality. | EQ |
• Each time you press the button:
HEAVY | CLEAR | SOFT |
(Adds punch to rock) | (Clarifies higher sounds) | (For background music) |
EQ OFF (Canceled) 
VOCAL (Adds gloss to vocals) 
Live Virtualizer
You can create a
Press [SURROUND] to turn the Live Virtualizer ON/OFF.
Note
The actual effect depends on the source played.
Specifications
Play timer
You can set the timer to come on at a certain time to wake you up.
Preparation:
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio, OPTION or music port source, and set the volume.
Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK 
zPLAY 
Original display
“ON TIME” is displayed. Within 5 seconds, press [2/u] or [1/i] to set the starting time.
Press [CLOCK/TIMER] to confirm.
“OFF TIME” is displayed. Repeat steps 2 and 3 to set the finishing time.
To activate the timer
Press [zPLAY] to turn on the timer.
Press [^] to turn off the unit.
To | Action |
|
|
Change the settings | Repeat steps 1 to 4 and 6. |
|
|
Change the source of volume | Press [zPLAY] to clear zPLAY indicator |
| from the display. |
| Make changes to the source or volume. |
| Perform steps 5 and 6. |
|
|
Check the settings (when the | Press [CLOCK/TIMER] repeatedly to select |
unit is on or in standby mode) | zPLAY. |
|
|
Cancel | Press [zPLAY] to clear the timer |
| indicator from the display. |
|
|
Note |
|
•The timer will start at the preset time, with the volume increasing gradually to the preset level.
•The timer comes on at the set time every day if the timer is on.
•The unit must be in the standby mode for the timer to function.
•If you turn the unit off and on again while the timer is functioning, the finish time setting will not be activated.
•When MUSIC PORT or OPTION port is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT or OPTION port as the source. If you wish to playback from the portable audio equipment, activate the equipment’s play mode and increase the volume. (See the portable audio
equipment’s instruction manual.)
g AMPLIFIER SECTION | g CD SECTION |
| g GENERAL |
|
| |
FTC OUTPUT POWER both channel driven | Disc played [8 cm (3") or 12 cm (5")] | Power supply |
| AC 120 V, 60 Hz | ||
simultaneously |
| (1) |
| Power consumption |
| 30 W |
10 % total harmonic distortion (THD) | (2) | Dimensions (W x H x D) |
|
| ||
1 kHz | 2.8 W per channel | (3) MP3 |
| 220 mm x 236 mm x 146 mm (8 21/32" x 9 9/32" x 5 3/4") | ||
RMS OUTPUT POWER both channel driven | Sampling frequency |
| Mass |
|
| |
simultaneously |
| CD | 44.1 kHz | With speakers |
| 3.57 kg (7.87 Ibs) |
10 % total harmonic distortion (THD) | MP3 | 32 kHz, 44.1 kHz, 48 kHz | Without speakers |
| 1.27 kg (2.80 Ibs) | |
1 kHz | 3 W per channel | Bit rate |
| Operating temperature range | +5 °C to +35 °C | |
Output impedance | MP3 | 32 kbps to 384 kbps |
|
| (+41 °F to +95 °F) | |
HEADPHONE | 16 Ω to 32 Ω | Decoding | 16/20/24 bit linear | Operating humidity range |
| |
MUSIC PORT | 14 kΩ | Pick up |
| 5 % to 90 % RH (no condensation | ||
DC IN Jack |
| Wavelength | 785 nm | g SPEAKER SECTION |
|
|
Terminal | DC 14 V | Laser power | CLASS 1 | Type | 1 Way, 1 Speaker system | |
Phone Jack |
| Audio Output (Disc) |
| Speaker(s) |
|
|
Terminal | 3.5 mm stereo | Number of channels | 2 channel | Full Range Speaker 8 cm (5 1/2") cone type 6 Ω | ||
Music Port Jack |
| Frequency response 20 Hz to 20 kHz (+1, | Impedance |
| 6 Ω | |
Terminal | 3.5 mm stereo | Wow and flutter | Below measurement limit | Input power |
| 6 W (MAX) |
Option Port | Version 1 | Digital filter | 8 | Dimensions (W x H x D) |
|
|
g TUNER SECTION |
| D/A converter | MASH (1 bit DAC) | 121 mm x 236 mm x 146 mm (4 3/4" x 9 9/32" x 5 3/4") | ||
Frequency range |
|
|
|
|
|
|
|
|
| Power consumption in standby mode: 2.0 W (approx.) | |||
FM | 87.9 MHz to 107.9 MHz (200 kHz) |
|
| |||
|
|
|
|
| ||
|
| Notes: |
|
| ||
| 87.5 MHz to 108.0 MHz (100 kHz) |
|
|
|
| |
|
|
| Specifications are subject to change without notice. | |||
AM | 520 kHz to 1710 kHz (10 kHz) |
|
| |||
|
|
|
| Mass and dimensions are approximate. | ||
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
•Never use alcohol, paint thinner or benzine to clean this unit.
•Before using chemically treated cloth, read the instructions that came with the cloth
6carefully.
Care of the CD lens
•Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a cotton swab if it is extremely dirty.
Recommended product: Lens cleaner kit (part no. SZZP1038C).
• Do not use the lens cleaner of the CD type. | 7 |
