Panasonic SC-HT790V, SC-HT800V, SC-HT810V For better video from DVD

For better video from DVD

The following connections are for video from the DVD section only. Make sure you have connected the VIDEO OUT terminal with the television to view video from the VCR section (➡ page 12).

You may need to change the video-input mode on the television to view video from the VCR and DVD sections. Read your television’s operating instructions for details.

∫Connecting a television with COMPONENT VIDEO terminals

DVD		DVD/	EXT
		VCR
DVD	DVD/	EXT
	VCR		RF IN	RF OUT
	VIDEO	VIDEO
	OUT	IN		LOOP EXT
			75
Y
PB/CB			L	AM ANT
			ANT
				LOOP
PR/CR			R	ANT
				GND
S-VIDEO	LINE	LINE
OUT	OUT	IN

COMPONENT VIDEO OUT terminal

These terminals can be used for either interlace or progressive output and provide a purer picture than the S-VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.

≥The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color.

≥After making this connection, change the black level for a better picture (➡ page 31, Video—Black Level Control).

To television

Video cables

(not included)

Television

(not included)

Y

PB

PR

COMPONENT

VIDEO IN

To enjoy progressive video

≥Connect to the component video input terminals on a 480P compatible television. (Video will not be displayed correctly if connected to an incompatible television.)

≥All televisions manufactured by Panasonic and that have 480P input connectors are compatible. Consult the manufacturer if you have another brand of television.

∫Connecting a television with an S-VIDEO IN terminal

DVD		DVD/	EXT
		VCR
			RF IN	RF OUT
		VIDEO	VIDEO
		OUT	IN	LOOP EXT
			75
Y
PB/CB			L	AM ANT
			ANT
				LOOP
PR/CR			R	ANT
				GND
COMPONENT	S-VIDEO	LINE	LINE
VIDEO OUT	OUT	OUT	IN

To television

S-video cable

(not included)

Television

(not included)

S-VIDEO OUT terminal

The S-video terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance

(Y) signals. (Actual results depend on the television.)

[Note]

Connect to a different terminal group than that you used for the video cable (e.g., “VIDEO 2”).

Picture from this unit’s VCR will not appear when you use the same group input terminal connections because the S-video terminal input takes precedence.

SVIDEO IN

RQT6951

13