Note
•Do not use any other AC adaptors except the supplied one.
•When this unit is not used over a long period of time, charge the
•Charging may not start if the battery level is sufficiently high even if it is not full.
•It is recommended to charge the battery in the temperature of between 10 oC and 35 oC. The Battery indicator (red) may flash and charging may not be possible when it is out of recommended temperature range.
•The battery may not charge when the temperature surrounding the battery is high during the operation or right after the operation even when it is within the recommended temperature range. In such case, stop the usage and let it cool down.
•To ensure safety, in the case of an excessive input signal, the system may be automatically interrupted and power is turned off.
•Use of the DC OUT terminal will reduce the operating time.
About the DC OUT terminal (USB)
The DC OUT terminal of this unit is for supplying/charging power to a connected device (rated value: 5 V/1 A). Note that the port cannot be used for purposes other than supplying/charging power.
Note that when the unit is turned off, charging is not possible.
Preparation
Turn on the unit.
1Using a USB cable
2Once fully charged, remove the USB cable
Rear view
USB cable (commercially- available)
[NA30]
[NA10]
To the compatible device
Note
•A cable compatible with your device is required. If a cable is supplied with your device, use the cable.
•Even if you connect a cable compatible with the DC OUT terminal of this unit, your device may not be charged. In that case, use a charger supplied with your device.
•Depending on your device, charging methods other than the specified one may not be allowed. Check the operating instructions of your device before use.
•Do not connect a device with a rated value higher than 5 V/1 A to this unit. Doing so may cause malfunction.
•To check if charging is complete, look at the screen of the connected device, etc.
•After charging, pull out the compatible cable.
VQT5C51
9
