Listening operations
12
RQT7364
CDs
Listening to a CD placed in a specific tray
Preparation:
Press [CD 3/8] and then [STOP 7, –DEMO].
Placing a CD in your desired tray
1Press [0 CD CHANGE].
2(Within about 10 seconds)
Press [CD 1] ~ [CD 5] and insert the CD on the
tray.
Press [0 CD CHANGE] again to close.
Repeat steps 1 and 2 to insert up to 5 CDs.
Listening to the CD placed in a specific tray
3Press [CD 1] ~ [CD 5] to start play.
The player stops after playing the last track.
4Adjust the volume.
To remove the CD
You can change the CDs in the other trays while one CD is
playing (except in All-Disc Random play or program play).
Press [0 CD CHANGE].
Press [CD 1] ~ [CD 5].
Press [0 CD CHANGE] again to close the tray.
Press [CD CHECK].
The tray with a CD being played will not open.
If the player is stopped, all trays will open.
Press [CD CHECK] again to close the trays.
•Do not remove or insert CDs during a CD check.
•Do not pull out the trays during a CD check.
•8 cm (33/20˝) CDs cannot be checked.
Marking a track
You can mark one track each on the 5 discs loaded so that you
can start play from them later. (\ page 19)
Disc tray
Label must face upward.
Tray
number
CD CHECK
STOP 7
,
–
DEMO CD 6
1
0
CD
CHANGE
2
CD 1 CD 2 CD 3 CD 4 CD 5
0
CD
CHANGE
3
CD 1 CD 2 CD 3 CD 4 CD 5
4
DOWN
VOLUME
UP
CD
CHECK
CD CHECK
ATo check which CDs are in the trays
(CD CHECK)
RQT7364-P_09-15_EN 30/12/03, 10:35 am12