Panasonic SC-PM45 manual Cassette tape, TPS Tape Program Sensor, Recording, Erasure prevention

Cassette tape

Basic play

1 Press [0] on top of the unit.

		0
2	Insert the cassette.
		Insert inside the
		guides
		Forward side
3	Close the lid by hand.
4	Press [TAPE 3] to start play.
	To play the other side of the cassette, turn the cassette
	over.
To		Action
stop tape playback		Press [CLEAR 7].
start one-touch play		Press [TAPE 3] when the unit is OFF with
		the cassette loaded.
fast-forward and		Press [ /REW/4] or [ /FF/¢] in the
rewind		stop mode.

Note

•Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.

•Endless tapes can get caught up in the deck’s moving parts if used incorrectly.

TPS (Tape Program Sensor)

This function enables you to search the beginning of a track, up to a maximum of 9.

Press [/REW/4] or [/FF/¢] during play.

Play resumes from the track found.

Note

TPS may not function properly:

•with short silent parts

•when noise occurs between tunes

•if silent parts are found within tunes

Recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly.

Preparation

Wind the leader tape so that recording can begin immediately.

1	Insert the cassette to be recorded.
2	Select the source to be recorded.
	7 Radio recording:
		Tune in the station. (➡ page 10)
	7 Disc or USB recording:
		1 Disc
		Insert the disc you want to record.
		Press [CD 6] and then [CLEAR 7].
		USB
		Connect the USB mass storage device. (➡ page 13)
		Press [USB 6] and then press [CLEAR 7] twice.
		2 Prepare the desired recording mode.
		To	Action
		record	Program the tracks you want. (➡ page 8)
		programmed
		tracks
		record	Press [PLAY MODE] to select your desired
		specifi c tracks	mode. (➡ page 7)

7Music port recording:

Connect the portable audio equipment. (➡ page 13) Press [MUSIC PORT].

Play the portable audio equipment.

3 Press [¶ REC/8] to start recording.

To	Action
stop recording	Press [CLEAR 7].
stop recording	1)	Press [¶ REC/8].
temporarily	2)	Press again to resume recording.
record on the other	Turn the cassette over and press
side of the tape	[¶ REC/8].
erase a recorded	1)	Insert the recorded cassette.
sound	2)	Press [TAPE 3] and then [CLEAR 7].
	3)	Press [¶ REC/8].

Erasure prevention

The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown.

Side A

Tab for side B Tab for side A

To re-record

Normal tape

Adhesive tape

ENGLISH

RQTV0177

9

9