CD Stereo System

Model No. SC-PMX9DB

VQC9510

Wi-Fi®connection guide

You can wirelessly stream music from an iOS device, an Android™ device or a Mac/PC to SC-PMX9DB’s speakers. To use this music-streaming feature, SC-PMX9DB must join the same 2.4 GHz wireless network as the compatible device through the wireless network router (access point).

≥For information on how to connect with a LAN cable, refer to “Wired LAN connection” in the Operating Instructions.

iOS device*1, Android device

Wireless network

SC-PMX9DB

or Mac/PC

router

 

*1: Refer to the Operating Instructions for the compatibility.

Screen images used in this sheet : iPhone 4S, iOS 6.0.1

Start wireless network settings

Preparation

1 Place SC-PMX9DB close to the wireless network router as possible and then point the antenna on the rear of the main unit up as shown in the figure.

Do not tilting the antenna forward or backwards when it is pointing up.

2Connect the AC mains lead while the LAN cable is disconnected.

3Turn this system on.

4Follow the chart below to choose the network setting method.

If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced setting, refer to “Method 4” in the operating instructions.

Does your wireless network router support

WPS (Wi-Fi Protected SetupTM)?

Yes

No / Do not know

 

 

 

 

 

 

 

 

Are you using an iPod touch/iPhone/iPad?

Is the iOS version 5.0 or later?

Yes

No

Method 1

Method 2

 

Method 3

 

1 Press [SETUP] on the remote

The following explanations are based on an iPhone.

 

3 Start “Panasonic Stereo System

 

 

 

control repeatedly to select

Disconnect iPod/iPhone/iPad

Press [SETUP] on the remote

 

Network Setup” on your smartphone

“Net Setup” and then press [OK].

1 connected to the main unit.

4 control repeatedly to select

 

and follow the indications.

“With iPod” is indicated on the display.

2 Connect the iPhone to your

“Net Setup” and then press [OK].

 

∫ Note for the iOS version

2 Press [SETUP] on the remote

“With iPod” is indicated on the display.

You can make the wireless

After step 3

control repeatedly to select “WPS

home wireless network.

5 Unlock your iPhone and then

network settings with the app,

1 Enter the password for the home

Push” and then press [OK].

 

wireless network to which the iOS

 

press [OK] on the remote control.

“Panasonic Stereo System

“WPS” flashes on the display.

 

6 A message will pop-up on the

Network Setup” (for free).

device is connected.

 

 

2 When a message instructing you

 

3 Connect the iPhone to the

If you’re using an Android device,

 

iPhone. Allow the iPhone to share

download the app at Google

to connect the iOS device to this

 

the wireless network settings.

system is displayed, press the

 

main unit.

 

Play™. If you’re using an iPod

home button.

 

Choose one of the following

 

 

 

touch/iPhone/iPad, download it at

3 On the Wi-Fi network selection

 

connections.

 

3 Press the WPS button on the

 

the App Store.

screen in “Settings”, select

Lightning connector compatible iPod

 

“00 Setup _ _ _ _ _ _”.

 

Preparation

touch/iPhone:

 

 

wireless network router.

 

 

≥Connect your smartphone to

 

*2

 

 

 

 

7 The settings are completed

your home wireless network.

 

 

 

≥Check the password for your

 

 

 

when “Success” is displayed

home wireless network.

4 When a message indicating the

The settings are completed when

 

and “ ” is indicated on the

Press [SETUP] on the remote

completion of the connection to

“Success” is displayed and “ ” is

 

display.

this system is displayed, restart

indicated on the display.

iPod touch/iPhone/iPad with

Press [OK] on the remote

1 control repeatedly to select

the app.

 

iOS 5.0 or later:

“Net Setup” and then press [OK].

 

 

 

8 control to exit.

“With iPod” is indicated on the display.

 

 

 

 

Press [SETUP] on the remote

 

 

 

 

2 control repeatedly to select

 

 

 

 

“Manual” and then press [OK].

 

 

iPad

 

 

 

 

 

 

 

5 When a message indicating the

Press [OK] on the remote

 

 

 

completion of the Wi-Fi setup of

 

 

 

this system is displayed, close the

4 control to exit.

Dedicated cable supplied with the iOS

 

 

app, and then check the operation

 

device

 

 

of AirPlay, etc.

*2 : The marking may differ.

 

 

 

 

Using AirPlay

1 Connect the iPhone to your home wireless network.

 

 

The following explanations are based on an iPhone.

AirPlay, the AirPlay logo, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

Android and Google Play are trademarks of Google Inc.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.

The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

“Wi-Fi” and “Wi-Fi Protected Setup” are marks or registered marks of the Wi-Fi Alliance.

All other trademarks are trademarks of their respective owners.

“Settings”

“Wi-Fi”

Turn on

Your home wireless

network name

 

 

 

 

 

 

(SSID)*3

*3 : You may be prompted for the password. Enter the password of your home wireless network.

2 Select “Panasonic PMX9 _ _ _ _ _ _” from the AirPlay icon and start play.

 

“Panasonic PMX9 _ _ _ _ _ _”

“Music”

Play starts.

(with a slight delay)

 

Page 1
Image 1
Panasonic SC-PMX9DB operating instructions CD Stereo System, Wi-Ficonnection guide, Start wireless network settings