To prevent falling of the speakers
Secure the speaker.
Using the tie down area on the rear of the speaker and a cord (not supplied), secure the speaker to a wall anchor (not supplied) permanently attached to the wall.
1 Thread a cord to the speaker.
≥Use a cord of less than ‰ 2.0 mm (3/32q), which is capable of supporting over 10 kg (22 lbs).
ACord (not supplied)
2 Thread a cord from the wall to the speaker and tie tightly.
BWall anchor (not supplied) C Wall or pillar
D Approx.100 mm (4q)
Troubleshooting guide
Before requesting service, please perform the following steps.
∫Unit does not respond to remote
control or unit’s buttons.
Disconnect AC power supply cord, wait 1 minute, then reconnect AC power supply cord.
Do you have the latest firmware installed? Panasonic is constantly improving the unit’s
firmware to ensure that our customers are enjoying the latest technology. (> 7)
4
Make the following checks and visit our website for more information. www.panasonic.com/support
Enter the model number. 4
Or visit our website to find a service center. You can find a service center near you easily
on our website.
Other support information:
“Customer Services Directory (United States)” (> 19).
The following do not indicate a problem with this unit:
–Regular disc rotating sounds.
–Image disturbance during search.
General operation
To return to the factory defaults.
¾Select “Restore” in “Default” in the Setup menu. (> 15)
To return all settings to the factory preset.
¾Reset the unit as follows:
1 Turn the unit on.
2 Press [<] to open the disc tray.
3 Press and hold [∫] and [1/;] on the main unit at the same time for more than
5 seconds.
You have forgotten your ratings password. You want to cancel the ratings level.
¾The ratings level returns to the factory defaults. jRestore the default settings following the steps described in “To return all settings to
the factory preset.”. (> above)
16 VQT5J81
