4
RQT9682
Getting StartedPlaying DiscsOther OperationsReference
Other Panasonic audio/video equipment may start functioning when you
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control
operating mode to “REMOTE2”.
The main unit and remote control must be set to the same mode.
1 Press [EXT-IN]4 to select “AUX/TV”.
2 Press and hold [< OPEN/CLOSE]2 on the main unit and [2] on the
remote control until the main unit’s display shows “REMOTE2”.
3 Press and hold [OK]8 and [2] on the remote control for at least
2 seconds.
To change the mode back to “REMOTE1”, repeat the steps above by
replacing [2] with [1].
Control reference guide
Remote control
1Turn the main unit on/off (B8)
2Select channels and title numbers etc. / Enter numbers
(B8, 11)
3Cancel (B12)
4Source select
[DVD]: Select disc as the source (B11)
[RADIO]: Select FM tuner (B8)
[EXT-IN]: Select external audio as the source (B9)
AUX/TV () USB
5Basic operations for play (B11)
6Show on-screen menu (B12)
7Show a disc top menu (B11)
8Select or confirm menu items / Frame-by-frame (B11)
9Select the play mode / Set the repeat mode (B12)
:Select sound mode / Turn Whisper-mode Surround on/off
(B10)
;Select surround sound effects (B10)
or
Set the Sleep timer
Press and hold [jSLEEP].
While the time is shown on the main unit’s display, press
[jSLEEP] repeatedly.
Each time you press the button:
SLEEP30 # SLEEP 60 # SLEEP 90 # SLEEP120
^-------------------------- OFF (Cancel) (------------------------}
≥To confirm the remaining time, press and hold the button again.
<TV operations
Aim the remote control at the Panasonic TV and press the
button.
[TV, Í]: Turn the TV on/off
[INPUT, AV]: Change the TV’s video input mode
[r, VOL, s]: Adjust the TV volume
This may not work properly with some models.
=Adjust the volume of the main unit
>Mute the sound
≥“MUTE” flashes on the main unit’s display while the function is on.
≥To cancel, press the button again or adjust the volume.
≥Muting is cancelled when you switch the unit to standby.
?Select radio stations manually (B8)
@Select preset radio stations (B8)
AExit the display
BShow START menu (B9)
CShow a disc menu (B11)
DReturn to previous screen (B11)
ESwitch information on the main unit’s display (B11)
FSelect speaker channel (B10)
Avoiding interference with other Panasonic equipment
Main unit
1Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2Open/Close the disc tray (B11)
3Disc tray
4Remote control signal sensor
5Display (FL display)
6Connect USB device (B13)
7Adjust the volume of the main unit
POWER-SAVING FEATURES
The main unit is designed to conserve its power
consumption and save energy.
∫Auto power-down function
≥The main unit will automatically switch to standby mode
after 30 minutes of inactivity.
e.g.
–There is no audio signal from an external device.
–Media playback is stopped/paused.
–The disc menu is displayed and play is not selected.
(This function may not work depending on the application
type of discs.)
≥When the main unit is turned back on, “POWER ON FROM
AUTO POWER DOWN MODE” appears on the main unit’s
display.
SC-XH20GC_RQT9682-G_eng.book Page 4 Wednesday, January 4, 2012 4:19 PM