11
RQT9812
Getting StartedPlaying DiscsOther OperationsReference
Preparation
Make sure that there is an audio connection between this unit and the
TV or other device. (B8)
Turn on the TV or/and other device.
Press [EXT-IN]4 to choose the source that is used to
connect this unit to the TV or other device.
To change the surround sound effects and sound mode, refer to
“Enjoying sound effects from all speakers” (Bright).
If your Panasonic TV is VIERA Link compatible, refer to “Linked
operations with the TV” (B15) for other related functions.
Select to suit the type of audio from the DIGITAL AUDIO IN OPTICAL and
HDMI AV OUT terminal on the main unit.
Underlined items are the factory presets.
§Only when “D-IN” is selected.
Be sure to select the device’s (STB, etc.) input channel on the TV when
making the setting.
The device must be connected to the Panasonic TV via an HDMI cable
and to this unit with an optical digital audio cable.
If the device’s (STB, etc.) input channel on the TV is changed or if you
want to change the device allocated for the linked operations, select
the “STB” mode to “OFF” in step 3 above and then select “SET”
again.
This function will not operate if “DIGITAL IN” is selected in “TV Audio”
(B18).
The following sound effects may not be available or may have no effect
with some sources.
When the Karaoke mode is “On” or a microphone is connected,
surround sound effects will not work.
You may experience a reduction in sound quality when these sound
effects are used with some sources. If this occurs, turn the sound effects
off.
When changing the surround sound effect, Whisper-mode Surround or the
sound modes, the setting is displayed on the TV screen if “DVD/CD” or “USB” is
the selected source during video playback.
For “Front layout (Alternative)”§ mode
STANDARD:
Stereo source is output as 2.1-channel audio.
When playing surround sources, you can enjoy 5.1-channel
surround-like effect even with all the speakers at the front.
STEREO:
You can play any source in stereo. Surround sound effect is
unavailable.
A.SRD (Advanced Surround):
You can enjoy surround effect with any audio source.
When the signal is Dolby Digital, “/DOLBY DIGITAL” will also be
displayed.
§Selected mode in “Speaker layout” (B9, Easy setup).

Listening to the TV or other device’s

audio from this unit’s speakers

Making settings for digital audio input
Available settings
Mode Setting
DUAL: (Only works with Dolby Dual Mono)
MAIN+SAP (stereo audio)
MAIN
SAP
SAP” = Secondary Audio Program
Set PCM FIX mode to “OFF” to listen to the “MAIN” or
“SAP” audio.
DRC:
(Dynamic
Range
Compression)
ON
Adjust for clarity even when the volume is low by
compressing the range of the lowest sound level and
the highest sound level. Convenient for late night
viewing. (Only works with Dolby Digital)
OFF
The full dynamic range of the signal is reproduced.
PCM FIX: ON
Select when receiving only PCM signals.
OFF
Select when receiving Dolby Digital and PCM signals.
When receiving true 5.1-channel surround sound,
select “OFF”.
STB§:
(CABLE/SAT
AUDIO)
SET
Select when setting the main unit to switch to
“D-IN” when the input channel of an HDMI connected
device (STB, etc.) is selected on the TV (B15,
Setting the audio link with the STB).
OFF
Select to cancel this setting.
1Press [EXT-IN]4 several times to select “D-IN” or
“ARC”.
2Press [PLAYMODE]9 and then [3,4]8 to select the
mode.
3While the selected mode is displayed, press [2,1]8 to
select the desired setting.

Enjoying sound effects from all

speakers

Enjoying surround sound effects

Press [SURROUND];.
Each time you press the button:
For “Surround layout (Recommended)”§ mode
STANDARD:
Sound is output as it was recorded/encoded. Speaker output varies
depending on the source.
MULTI-CH:
You can enjoy sound from the front speakers, as well as the surround
speakers and center speaker even when playing stereo sources.
MANUAL: (Bbelow)
While “MANUAL” is displayed, press [2,1]8 to select
other surround modes.
Each time you press [2,1]8:
DOLBY PLII MOVIE
Suitable for movies, or videos recorded in Dolby Surround.
DOLBY PLII MUSIC
Adds 5.1-channel effects to stereo sources.
S.SRD (Super Surround)
You can enjoy surround effect with stereo sources.
STEREO
Sound will only be output to the front speakers and the subwoofer from
any source.
Recommended modes to enjoy TV audio or stereo
sources from all speakers:
“MULTI-CH”, “DOLBY PL
II
MOVIE”, “DOLBY PL
II
MUSIC” or “S.SRD”
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 11 ページ 2012年12月10日 月曜日 午後8時27分