18
RQT9812

Ratings

Set a rating level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
1 to 7
8 No Limit
When you select your ratings level, a password screen is shown.
The default password is “0000”.
Enter the 4-digit password with the numbered buttons, and press [OK]8.
You can change the default password (Bbelow)
Do not forget your password.
A message screen will be shown if a DVD-Video disc exceeding the rating
level is inserted in the unit.
Follow the on-screen instructions.

Set Password

Change the password for “Ratings”.
When you change the password for the first time:
The default password is “0000”.
Follow the on-screen instructions.

Restore Default Settings

This returns all values in the Setup menu to the default setti ngs except the
password and ratings level.
Press [2,1]8 to select “Yes” and press [OK]8.
Turn the unit off and on again.

Speaker Settings

Select the delay time of the speakers.
(Effective only when “Surround layout (Recommended)” mode is selected
in “Speaker layout” (B9, Easy setup).)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position.
If you have to place the center or surround speakers closer to the seating
position, adjust the delay time to make up for the difference.
If either distance a or b is less than c, find the difference in the table
and change to the recommended setting.
a Center speaker b Surround speaker
Difference (Approx.) Setting Difference (Approx.) Setting
30cm 1ms 150cm 5ms
60cm 2ms 300cm 10ms
90cm 3ms 450cm 15ms
120cm 4ms
150cm 5ms
C Delay (Center Delay):
0ms, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
LS/RS Delay (Left Surround/Right Surround Delay):
0ms, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
Test To ne:
Use the test tone to listen to the speaker output to confirm speaker
connections.
Test tone will be output to each channel in the following order.
Left, Center, Right, Surround Right, Surround Left, Subwoofer
To stop the test tone, press [RETURN]D.

HDMI menu

VIERA Link

On: The VIERA Link “HDAVI Control” function is available (B15).
Off

Audio Out

On: When audio output is from the HDMI AV OUT terminal.
(Depending on the capabilities of the connected equipment,
audio output may differ from the audio settings of the main unit.)
Off: When audio output is not from the HDMI AV OUT terminal. (The
audio is output using the settings of the main unit.)

Power Off Link

Select the desired power off link setting of this unit for VIERA Link
operation (B15). (This works depending on the settings of the connected
VIERA Link “HDAVI Control” compatible equipment.)
Video/Audio: When the TV is turned off, this unit will turn off
automatically.
Video: When the TV is turned off, this unit will turn off except during the
following conditions:
–audio playback ([CD] [MP3])
–radio mode
–“AUX”, “ARC” or “D-IN” mode (non-selected TV audio setting
for VIERA Link)

TV Audio

Select the TV audio input to work with the VIERA Link operations (B15).
AUX
ARC
DIGITAL IN
L
LS
R
SW
C
RS
C
RS
LS

:

:

:

Actual speaker position
Ideal speaker position
Primary listening
distance
Approximate room dimensions
Circle of constant primary listening distance

Others menu

Slide Show Time

Set the speed of the slideshow.
3 Seconds 5 Seconds 10 Seconds 15 Seconds

Easy setup

You can execute basic settings to optimise your home theater system.
(B9)

FL Dimmer

Change the brightness of the unit’s display.
Bright
Dim: The display is dimmed.
Auto: The display is dimmed, but brightens when you perform some
operations.

Screen Saver

This is to prevent burn marks on the TV screen.
Off
Wait 5 min: If there is no operation for 5 minutes, the screen saver will
be shown. The TV screen will resume when you perform
some operations. (This does not work during playback.)
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 18 ページ 2012年12月10日 月曜日 午後8時27分