20
RQT9812
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached should be
capable of supporting 10kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).

∫Tips

Use the measurements indicated below to identify the screwing positions
on the wall.
≥Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.

Speaker installation option

Attaching to a wall
e.g., Center speaker
DO NOT DO
≥In this position, the speaker will
likely fall if moved to the left or
right.
≥Move the speaker so that the
screw is in this position.
[XH300]
Front
speaker [XH300] Surround speaker
Center speaker
At least 30 mm

‰7.0 mm to ‰9.4 mm

Wall or pillar 5.5 mm to 7.5 mm
‰4.0 mm

A25 mm
B198 mm
C45 mm
D45 mm

E41 mm
F102 mm
G40 mm
H40 mm

I18 mm
J66 mm
K25 mm
L101 mm
M28 mm
[XH380] [XH370] Front/Surround speaker
Attach to a wall without the base and the stand.

∫To prevent speakers from falling

Front speaker, Surround speaker, Center speaker
≥You will need to obtain the appropriate screw eyes to match the walls or
pillars to which they are going to be fastened.
≥Use a string of less than ‰2.0 mm, which is capable of supporting over
10kg.
e.g. [XH380] [XH370] Front speaker

N22 mm
O330 mm
P172 mm
Q45 mm
R45 mm
Wall
Screw eye
(not supplied)
String (not supplied)
Approx. 120mm
[XH380] [XH370]
Reattaching the speaker cable
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 20 ページ ２０１２年１２月１０日　月曜日　午後８時２７分