81
LSQT1363
With a PC
Connection and recognition
After the software is installed, the unit must be
connected to the PC and be correctly recognised
by the PC.
Remove the supplied CD-ROM from your PC.
¬Connect this unit to the AC adaptor
and turn on the unit.
1Connect this unit and a PC.
AUSB cable (supplied)
Insert the USB connectors as far as they will
go.
Do not use any other USB connection cables
except the supplied one. (Operation is not
guaranteed with any other USB cables.)
The USB function selection screen will appear.
2Select [PC CONNECT] # [HDD]

or [SD CARD] then press the

joystick.
This unit is automatically detected by the PC.
When the unit is connected to a PC, its
power cannot be turned off. Disconnect the
USB cable before turning this unit off.
(l82)
Do not disconnect the USB cable or AC
adaptor while the access lamp is on or access
icon ( or ) appears on the LCD
monitor. Doing so may damage the data on the
HDD or SD card.
The HDD and SD card cannot be accessed
simultaneously.
It may be necessary to reboot the PC after
connecting this unit to it for the first time.
When the unit is connected to a PC, it is
recognised as an external drive.
This unit supports only the readout of data
using the PC. The PC cannot write data to the
unit, or erase data from the unit.
Depending on the operating environment of the
PC, the shape of the drive icon and the drive
name will differ.

Drive icons

The icon is displayed in [My Computer (Computer)].
When accessing the HDD
Windows Vista:
Windows XP:
Windows 2000:
When accessing the card
Windows Vista:
Windows XP:
Windows 2000:

Connection and recognition

procedures

A

About the PC display

LSQT1363(EB_ENG).book 81 ページ 2008年2月5日 火曜日 午後5時52分