52
LSQT1562
Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too
dark.
1Select the manual mode. (l49)
2Select [ ] or [ ] with the
joystick.
3Adjust the settings with the
joystick.
AShutter speed:
1/60 to 1/8000
1/60 to 1/500
≥The shutter speed closer to 1/8000 is faster.
≥If [AUTO SLW SHTR] is set to [ON], the
slowest shutter speed is 1/30.
BIris/Gain value:
CLOSE # (F16 to F2.2) # OPEN #
(0dB to 18dB)
≥Value closer to [CLOSE] darkens the image.
≥Value closer to [18dB] brightens the image.
≥When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
To restore to automatic adjustment
Press the iA button.
≥When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
∫Manual shutter speed adjustment
≥Avoid recording under fluorescent light,
mercury light or sodium light because the color
and brightness of the playback image may
change.
≥If you increase the shutter speed manually, the
noise on the screen may increase.
≥You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
≥During normal playback, image movement
may not look smooth.
≥When recording in an extremely bright place,
the screen may change color or flicker. If so
adjust the shutter speed manually to [1/60] or
[1/100].
∫Manual iris/gain adjustment
≥If the gain value is increased, the noise on the
screen increases.
≥Depending on the zoom magnification, there
are iris values that are not displayed.
Manual shutter speed/
aperture adjustment
MNL
4/44/4
NEXTNEXT4/4
NEXT
OPEN
OPEN
1/
100
100
1/100
OPEN
MNL
BACK
BACK
BACK
SDR-S25P-LSQT1562_mst.book 52 ページ ２００９年２月１２日 木曜日 午後５時４８分