8
Setup
8
RQTX0125
ENGLISH
Setup
Refer also to the operating instructions for your home theater unit.
Conserving power
The wireless system consumes a small amount of power, even when it is
off (approx. 0.2 W). To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
Making the wireless link
1Turn on the wireless system.
2Turn on your home theater unit and check the wireless
link indicator on the home theater unit.
3Start play on the home theater unit.
AUTO OPERATION ON/OFF
POWER
Unit on/off button [POWER CI, BÍ]
Use this button to turn the unit on and off.
CI: The unit is on. BÍ: The unit is off.
AUTO OPERATION ON/OFF indicator
The indicator lights red when the unit is turned on and lights
green when the wireless link is activated.
When the wireless link is inactive for a long time, it turns red.
L
P
ST CT
RDS
RND
PGM
EQ
PRG
SRDE.
PL
DDTS
W2WS
W1
“ [W1] ” or an indicator should light up.
≥If “ [W1] ” or an indicator is flashing,
refer to Troubleshooting guide (➜page 10).
e.g. Display on the home theater unit
∫Pairing with existing SH-FX85 (not included)
Your wireless system can be used with SH-FX85, both operating on the
same wireless system as SH-FX85. By pairing, you can enjoy the
benefits of both systems working together simultaneously.
Preparation
≥Use the SH-FX85T transmitter card for pairing.
Store your SH-FX67T transmitter card in a cool dry place for later
use.
≥Make sure that the speaker and AC cord connections are completed,
and the surround selector is set to the “SURR” position (➜ page 7).
≥Turn on the home theater unit and SH-FX85, and then reduce the
volume.
1 Turn on SE-FX67.
2 While pressing the skip and slow-search button (e.g. [9/5]) on
the home theater unit, press the numbered button [3] on the remote
control until “P” lights in the home theater unit’s display.
≥The indicator on SE-FX67 turns green.
3 While “P” is displayed, press [I/D SET]
on the rear of SE-FX67.
≥If “P” goes off before you press
[I/D SET], repeat step 2 and then
continue the procedure.
4 While pressing [9/5] on the home theater unit,
press the numbered button [3] on the remote control.
≥“ [W1] ” or the wireless link indicator lights on the home theater
unit.
5 Turn off and on SE-FX67.
≥Make sure the indicator on SE-FX67 lights up green.
[Note[
Repeat the above steps if you should use SH-FX67T transmitter card
(the link with SH-FX85 will be disconnected).
Use a pointed object.
SH-FX67_RQTX0125_En_071207.fm Page 8 Friday, December 7, 2007 3:41 PM