Connecting the Speakers
Read the following before connecting your speakers:
•Turn off your receiver or amp before making any con- nections.
•Disconnect the power cord from the wall outlet before making any connections.
•Pay close attention to speaker wiring polarity. Connect positive (+) terminals to only positive (+) terminals, and negative
•Be careful not to short the posi-
tive and negative wires. Doing so may damage your amp.
Connecting the Speaker Cables
Use the supplied cables to connect each speaker’s input terminals to the corresponding speaker output terminals on your receiver.
Match the color of each cable to the corresponding speaker terminal.
To make a connection, while pressing
the terminal lever, insert the wire into the hole, and then release the lever. Make sure that the terminals are grip-
ping the bare wires, not the insulation.
Connecting the Subwoofer
Using the supplied RCA cable, connect the sub- woofer’s LINE INPUT to your receiver’s SUB-
WOOFER PRE OUT.
Front Right |
| Center | Front Left | |
Subwoofer |
|
|
|
|
|
| Red |
| Green |
|
|
|
| |
LINE INPUT |
|
|
|
|
SURROUND BACK | SURROUND | FRONT | CENTER |
|
SPEAKERS | SPEAKERS | SPEAKERS A | SPEAKER | White |
L |
|
| L | |
R |
|
| R |
|
PRE OUT |
|
|
| Blue |
|
|
|
| |
SUB |
|
|
|
|
WOOFER |
|
|
|
|
| Tan |
| Brown | Gray |
|
|
| ||
Surround | Surround | Surround | Surround |
Back Right | Back Left | Right | Left |
Power Cord
Precautions
•Before connecting the power cord, connect all of your speakers and AV components.
•Turning on the
Adjustment
Setting the Subwoofer Level
To set the level of the subwoofer, use the OUTPUT LEVEL control. Set it so that bass sounds are evenly bal- anced with the treble sounds from the other speakers. Because our ears are less sensitive to very low bass sounds, there’s a temptation to set the level of the sub- woofer too high. As a rule of thumb, set the subwoofer level to what you think is the optimal level, and then back it off slightly.
MIN MAX
OUTPUT LEVEL
