4
Listening to CDs

The letters such as Bin the various illustrations refer to the descriptions in the Location of Controls section.

Other Play Methods

Skip play

The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1Select the desired track.
2

Program play

Up to 24 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1Select the desired track.
2Register in sequence.
(The indication M and the programmed se-
quence appear on the display.)
3Repeat steps 1 and 2 to program all

the desired tracks.

4
To program the same track in the se-
quence more than once
After step 2, press [MEMORY/RECALL] the desired
number of times.
If ' is displayed
No more tracks can be programmed.

Changing the sound quality

Press during play or stop mode.

Each time the button is pressed;
S-XBS:
Select this setting to boost the low-range response.
Note!
The setting returns to S-XBS when you disconnect the
power source.
S-XBS> (Cancel)
B

I

C

MEMORY/
RECALL
B

I

F

S-XBS
To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
(The numbers of the programmed tracks appear on
the display in sequence.)
To delete the entire programmed se-
quence
Press [, OPR OFF].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.

Repeat play/Random play

Press during play or stop mode.

Each time the button is pressed;
1`(1-track repeat)
One track is repeated.
`(All-track repeat)
All the tracks on the disc are repeated.
RANDOM (Random)
The tracks play once each in random order and
then play stops.
RANDOM, `(Random repeat)
The tracks play repeatedly in random order.

When pressed during program play

Each time the button is pressed;
1`M (1-track repeat)
One track is repeated.
`M (Memory repeat)
The programmed tracks are repeated.
Note!
You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
You cannot select random play or random repeat play
during program play.
The mode is canceled when you disconnect the power
source.
C
RANDOM
1