Panasonic SL-SX286J Using the Unit with Optional Accessories, Maintaining Lens, Basic operation

Control play with the buttons on the main unit.

The tone will be heard if you use the buttons on the remote control.

4

Set the volume to 10.

Make further volume adjustments with the other unit.

3

Turn off this unit and the other equipment before operation.

1 Connect the remote control to the unit's headphone jack.

2 Connect the stereo connection cable to the remote control's headphone jack and the terminals on the other unit.

The unit may malfunction if you connect this cable directly to the unit.

Using the Wired Remote Control

The remote control can be operated regardless of the HOLD mode of the unit.

Basic operation

Preparation:

Release the remote control from the HOLD mode.

HOLD

∫Operation confirmation tones

»When an operation button is pressed, a confirmation tone sounds. Refer to the parentheses in the illustra- tion for the different types of confirmation tones.

Press once during off or stop mode.

To start play

(Beep)

Press once during play.

To stop play

(Beep...Beep)

Press and hold during play or stop mode.

To turn off

the unit

(Beep...Bee...p)

	Press during play.
	(Press [:] twice to skip to the beginning of
Skipping	the previous tracks.)
tracks		Backward
		(Beep Beep Beep)
Searching		Forward
through tracks		(Beep Beep)
	Press and hold during play.
To adjust the	Decrease		Increase
	(Beep)	VOL	(Beep)
volume
	≥The volume range is 0–25. (Press and hold
	to change the volume successively.)
	≥A tone (beep-beep) sounds		when you
	reach the minimum or maximum volume.

Other operations

To change sound quality

See page 4.

Using the Unit with Optional Accessories

Using the unit with a car audio system

Using the unit with an audio system

Items to be purchased

For connection to the car audio system

Car stereo cassette adaptor (SH-CDM10A)

Connect the car stereo cassette adaptor to the unit’s headphone jack.

(When doing this, set this unit’s volume to 10.)

For securing the unit and connecting the power supply:

≥Car adaptor (SH-CDC9)

≥Car mounting kit (SH-CDF20)

Note when using the car mounting kit (SH-CDF20)

Bracket	1Remove the screw from
	the bracket at the rear
	of the car mounting
	base.
	2Replace the screw in the
Screwdriver	lower hole of the bracket.

Note!

		Other equipment
	(White)	L
		CD or AUX
	(Red)	R
Headphone jack(Ë)
	Stereo connection
	cable
Wired remote control	(not included)

For your reference:

≥Obtain the optional connecting cable if the other equip- ment comes with mini-phone jacks.

≥If you connect speakers (active or otherwise) directly to the unit's headphone jack, ensure they have an imped- ance of 1 k≠ or less.

Note!

Do not connect the cable to the PHONO terminals on an amplifier.

Maintaining the

Lens

Open the lid and clean the lens as shown in the figure. Use a cotton swab to gently wipe off any finger-prints. Recommended product: Lens cleaner kit (SZZP1038C)

≥When you switch off the car, volume and sound quality may return to the original settings and the resume function may work even if you change the disc.

≥It may not be possible to use the unit with some types of car stereos owing to restrictions imposed by the construction of the car stereo cassette adaptor.

For further details, refer to the instructions of the part concerned.

Lens

Air blower for camera lens

Lens

RQT5961

5