| M |
| E |
| M |
| O |
| R |
| Y |
| M |
| ODE |
VOL | E |
| Q |
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com
Panasonic Sales Company,Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, see “Product information”(➪right) for assistance.
Model No. | Portable CD player | |
| ||
Operating Instructions | ||
|
| |
| ||
Dear Customer |
|
Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
The model number and serial | Please note them in the space |
| |
number of this product can be | provided below and keep for |
| |
found on either the back or the | future reference. |
| |
bottom of the unit. | MODEL NUMBER |
| |
| SERIAL NUMBER |
|
|
|
|
|
|
HOLD
This function causes the unit to ignore accidental button presses.
Set to HOLD so the unit doesn’t power on accidentally or play is interrupted.
Note on CD-R and CD-RW
This unit can play
§Finalizing is a process that enables
Resume function
The player stores the track where you stopped play or power was cut off. Opening the lid when the unit is in stop mode cancels the function.
Auto power off function
If the unit is left in stop mode for approximately 10 minutes, the unit powers itself off automatically.
Panasonic Canada Inc. |
|
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 | www.panasonic.ca |
C 2002 Matsushita Electric Industrial Co., Ltd. | |
Printed in China | F1102KN1073 |
Display
( | The HOLD function is on (➪above). |
)≥You haven’t inserted a disc or it isn’t inserted correctly. ≥You have inserted a disc this unit cannot play.
No sound or there is a lot of noise.
Play doesn’t resume from the track where play stopped at.
Play doesn’t start from the first track.
The unit stops working.
The battery indicator fails to appear or is incorrect.
≥The HOLD function is on (➪above). ≥The disc isn’t correctly set.
≥The disc is scratched or dirty. (Tracks skipped.)
≥There is moisture on the lens. Wait for about an hour and then try again.
≥The lens is dirty: clean it with a blower (recommended product: SZZP1038C).If the lens gets marked with fingerprints, gently wipe them off with a cotton swab.
≥Ensure the plugs are inserted firmly. ≥Wipe the plugs clean with a clean cloth.
≥The elapsed playing time disappears and sound is interrupted if bumps continue repeatedly.
≥Separate this unit from mobile telephones.
≥This doesn’t work if you open the lid while the unit is in stop mode. ≥This doesn’t work during random play.
≥It may not work correctly under some conditions.
≥Random play modes may be on (➪page 4).
≥Play resumes from the track where you last stopped play or power was cut off (play may start from a different track if you change discs after power is cut off). Use skip to return to the first track.
Disconnect then reconnect all power sources (batteries and AC adaptor).
≥The indicator does not appear when an AC adaptor is connected. ≥The indicator does not appear correctly under some conditions.
* | The disc lid is open. |
' | Full: The program already contains 20 tracks. |
Product service
1.Damage requiring
1.(a) The AC power supply cord or AC adaptor has been damaged; or
1.(b) Objects or liquids have gotten into the unit; or
1.(c) The unit has been exposed to rain; or
1.(d) The unit does not operate normally or exhibits a marked change in performance; or
1.(e) The unit has been dropped or the cabinet damaged.
2.
3.Replacement
4.Safety
For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS1 | TELEPHONE NUMBER |