Using the Wired Remote Control SL-SX390
The remote control can be operated regardless of the HOLD mode of the unit.
Preparation:
Release the remote control from the HOLD mode.
EQHOLD
HOLD
∫Operation confirmation tones
»When an operation button is pressed, a confirmation tone sounds. Refer to the parentheses in the illustra- tion for the different types of confirmation tones.
∫Turning the operation tones off and on
» While stopped or during play
» Press and hold [EQ] on the remote control for 5 sec- onds until the unit's display appears. The tone sounds when the setting is changed.
Basic operation
Press once during off or stop mode.
VOL
To start play
(Beep)
Press once during play.
VOL
To stop play
(Beep...Beep)
Press and hold during play or stop mode.
To turn off | VOL |
the unit |
|
(Beep...Bee...p)
| Press during play. |
|
|
| (Press [:] twice to skip to the beginning of | ||
Skipping | the previous tracks.) |
|
|
tracks |
| Backward |
|
|
|
| |
|
| (Beep Beep Beep) | |
|
| VOL |
|
Searching |
| Forward |
|
through tracks |
| (Beep Beep) | |
| Press and hold during play. |
| |
|
| VOL |
|
To adjust the | Decrease |
| Increase |
(Beep) | VOL | (Beep) | |
volume |
|
|
|
| ≥The volume range is | ||
| to change the volume successively.) | ||
| ≥A tone | when you | |
| reach the minimum or maximum volume. | ||
EQ | EQ | Changing the sound quality |
|
HOLD |
| ||
|
| ||
| (Beep) | Press during play or stop mode. | The setting switches in the sequence indicated below each time |
|
|
| [EQ] is pressed. |
To turn the tone off | To turn the tone on | EQ | HOLD | EQ | ^==========b |
|
(Beep)
Select this setting to boost the
TRAIN:
Select this setting to avoid annoying other passengers with noise from your headphones/earphones while riding on the train, or to reduce fatigue when listening for a long period of time.
Note!
The setting returns to
Using the Unit with Optional Accessories
Using the unit with an audio system
Using the unit with a car audio system
Turn off this unit and the other equipment before con- nection.
1 Connect the remote control to [Ë] on the unit.
2 Connect the stereo connection cable to the re- mote control and the other equipment.
≥The unit may malfunction if you connect directly to [Ë] on the unit.
≥Do not connect the cable to the PHONO jacks on the amplifier.
3 Turn the operation tones off (see above) so they are not heard when you press buttons on the re- mote control.
4 Set the volume to 10.
Make further volume adjustments with the other equipment.
1 Connect the stereo connection cable to [Ë] on the unit.
2 Set the volume to 10.
Make further volume adjustments with the other equipment.
Note!
≥Obtain the optional connecting cable if the other equip- ment comes with
≥If you connect speakers (active or otherwise) directly to the unit's headphone jack, ensure they have an imped- ance of 1 k≠ or less.
Headphone jack (Ë)
| Other equipment | |
HOLD | (White) | L To CD or |
| OPEN | AUX |
|
| |
| (Red) | R terminals |
VOL
Stereo connection cable (not included)
Items to be purchased
For connection to the car audio system
Car stereo cassette adaptor
Connect the car stereo cassette adaptor to [Ë] on the unit.
(When doing this, set this unit’s volume to 10.)
For securing the unit and connecting the power supply:
≥Car adaptor
≥Car mounting kit
Note when using the car mounting kit
Bracket | 1Remove the screw from | |
the bracket at the rear | ||
| ||
| of the car mounting | |
| base. | |
| 2Replace the screw in the | |
Screwdriver | lower hole of the bracket. | |
|
Note!
≥When you switch off the car, volume and sound quality may return to the original settings and the resume function may work even if you change the disc.
≥It may not be possible to use the unit with some types of car stereos owing to restrictions imposed by the construction of the car stereo cassette adaptor.
For further details, refer to the instructions of the part concerned.
5 | RQT6190 |
|
