Connections
Connecting the Antenna Cable to the Antenna Terminal
Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV.
VHF Antenna | UHF Antenna |
Mixer
75 Ohm
Coaxial Cable
Antenna Terminal
ANT | (ANT or VHF/UHF) |
|
Coaxial Antenna Plug
Antenna cover removal and fitting
TC-14LA1/ TC-17LA1
TC-20LA1
Removal
1 
2
Fitting
1 
2
1.Grasp the cover at the bottom end and initially remove by pulling slightly toward yourself.
2.Slowly pull out in the downward direction.
1.Insert the claws (at 4 points) at the top end.
2.Push the claws in (at 4 points) at the bottom end.
Removal |
| 1.Grasp the opening and initially |
|
| pull the cover slightly towards |
|
| yourself to disengage the |
|
| claws (at 2 points on both the |
1 | 2 | left and right). |
|
| 2.Slowly pull out in the |
|
| downward direction. |
Fitting |
| 1.Insert the claws (at 4 |
|
| points) at the top end. |
1 |
| 2.Push the claws in (at 4 |
|
| points) at the bottom |
end. 2
Note: To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together.
Antenna / Cable Connection
Incoming 75 Ohm Cable from Home Antenna / Cable Company
ANT (VHF/UHF)
on the Back of the TV
Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company. Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local Cable company for its compatibility requirements.
8
