Getting started
41
Frequently Asked Questions
Support Information
Specifications
Frequently Asked Questions (FAQ)
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out
the suggested check. If this does not solve the problem, visit the Panasonic website for further assistance.
(see cover)
Questions Answers
Picture
How do I view the picture from
devices such as a: Cable/Satellite
box, game console, Blu-ray or DVD
player?
zPress the INPUT button on the remote to select the correct
input source.
zCheck that the device is turned on and functioning correctly.
Why is there no picture or just a
blue, black or snowy screen being
displayed?
zCheck if the power cord is plugged in and the TV is turned on
(front red LED light should be on; not blinking)
zPress the INPUT button on the remote to select the correct
input source.
zEnsure all connections are correct and secure.
zWhen using external video source, such as a Cable/Satellite
box or DVD player, check that the device is on and functioning
correctly.
zPress MENU on the TV’s remote control. If the menu is
displayed, then the TV is working; recheck above steps.
Why doesn’t the picture look like it
is in High Definition?
zPress the INFO button on the remote to confirm the type of
signal being received (p. 16). HD signal should be 720P, 1080i
or 1080p.
zSelect a High Definition channel from your HD source (Cable,
Satellite or fiber optic service). HD channels sometimes
broadcast non-HD content.
zEnsure that your HD source (HD box, Blu-ray player, etc.) is
connected to the TV with an HDMI or Component cable and set
to output an HD video signal.
Why do black bars appear on the
top and bottom and/or sides of the
screen?
zChange the format (aspect ratio) of the picture by pressing the
FORMAT button on the remote control. (p. 16)
zCheck the aspect settings on your external video source, such
as Cable/Satellite box, DVD/Blu-ray Disc player, etc.
Note:
Some content, such as film-based movies, are available
in extra-wide format. Top and bottom bars are unavoidable.
Why is the picture snowy when
“ANT/Cable in” is selected?
zWhen using a cable service (without a box), check that all
connections are secure.
zWhen using a cable or satellite box, change the connection
(wiring) to Composite, Component or HDMI. (p. 10)
zIf you’re using an antenna, then check that connections are
secure. Change the position or direction of the antenna and
check the “Signal meter”. (p. 27)
Why is the picture chaotic and/
or torn and/or with a buzz in the
speakers?
zCheck if electrical products such as kitchen appliances, fluorescent lights
or light dimmers are nearby. They may interfere with the TV’s picture.
zTry viewing a picture from another device, such as a DVD player
or a game console, to narrow down the source of the problem.
Why is there a black box on the
screen?
zChange settings of Closed Caption (CC). (p. 15, 36)
Why is the screen blank and the
power indicator blinking?
zThe TV has gone into shutdown mode to protect itself. Try unplugging
it for a few minutes and connecting it again. If there was a temporary
power surge on the AC line it may now be OK. If the blinking returns,
call 1-877-95VIERA (U.S.A.) or 1-866-330-0014 (Canada).
Why do some small spots on the
screen remain bright or dark?
zThe LCD panel is made up of a few million pixels and is
produced with advanced technology through an intricate
process. Sometimes a few pixels may be bright or dark. These
pixels do not indicate a defective panel and will have no impact
on the performance of the TV.