Attaching the pedestal to TV
Set-up
zz Fix securely with assembly screws A . (Total 4 screws) zz Tighten screws firmly.
zz Tighten assembly screws B (total 4 screws) loosely at first, then tighten them firmly to fix securely.
32”
Neck | A |
| |
Front |
|
Base
Do not use the pedestal if it becomes warped or physically damaged.
zz If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During
Rear side
Arrow mark
Arrow mark
| Hole for pedestal | |
| installation | |
Neck | Base | |
Foam mat or thick |
| |
soft cloth |
| |
39” and 50” TV |
| |
Protrusion of Neck (Bottom) | A | |
Bracket | ||
| ||
Front | Base | |
| ||
Rear side |
|
Base | Bracket | Hole for pedestal | |
installation | |||
|
|
Do not disassemble or modify the pedestal.
zz Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use any pedestal other than that provided with this TV. zz Otherwise the TV may fall over and become damaged, and
personal injury may result.
Mounting screws measurements:
M4 x 4 (only for 32”)
M6 x 4 (for 39” and 50”)
Please contact your nearest Panasonic dealer to purchase the recommended
Screw for fixing the TV onto the
Depth of screw:
32” Minimum: 0.39” (10.0 mm)
32” Maximum: 0.63” (16.0 mm)
M4
(View from the side)
Screw for fixing the TV onto the
Depth of screw:
39” Minimum: 0.47” (12.0 mm)
39” Maximum: 0.87” (22.0 mm)
M6
50” Minimum: 0.63” (16.0 mm)
50” Maximum: 1.18” (30.0 mm)
(View from the side)
zz Customer assumes liabilityifmounting the unitthemselvesorifa
Panasonic bracket is not used.Anydamageresulting from nothavinga professionalinstaller mount your unit willvoidyourwarranty.
zz Always be suretoask aqualified technicianto perform any necessary
zz Do not mountthe unit directly below ceiling lights (suchas spotlights, floodlights or halogenlights)which typicallygive offhigh heat. Doing so may warp or damage plastic cabinet parts.
zz Takecare whenfixing wall brackets tothewall.Alwaysensurethat there are no electrical cables orpipesin thewall before hangingbracket.
zz When using an
zz Forsafety reasons, removeunits no longer beingused from their wall-
mounted locations. | 4 |
|