Panasonic TC-32LX34 owner manual First Time Setup, Turn the TV On with the Power button

First Time Setup

First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 17) is set to “No”.

Turn the TV On with the POWER button

(TV)(Remote)

oror

Configure your viewing mode

Select your language

Language / Idioma / Langue

English Español Français

select

OK

Select your viewing mode (Be sure to select “Home use”)

Set viewing mode		Step 2 of 6
Home Use
	Store Demonstration

OK

Select RETURN

select

OK

Please confirm your selection (Home Use) before pressing OK button.

If you select “Store Demonstration” by mistake in , confirmation screen will be displayed.

You are selecting the store demonstration mode.

YesNo

If you select “Yes”, the picture mode will regularly reset

to “Vivid” and a Picture Refresh message will be displayed on the screen.

select

OK

Select “No” and return to previous screen .

If you select “Yes”, Screen enters the store demonstration mode.

To display the “Set viewing mode” screen again as shown above and select “Home Use”, do one of the following:

•Press and hold down the side POWER button for at least five seconds.

•Unplug power cord for 30 seconds and plug it again.

Note

If you use any other step other than then turn the TV off, or if you used the EXIT

button to quit before completing the settings, the next time you turn the TV on, “First time setup” will not be automatically displayed.

•The settings up to that point are saved.

•You can start “First time setup” at any time. (p. 17)

Language, ANT/Cable setup, Input labels, Clock can also be changed from the Settings Menu. (p. 17)

10