Setup | Other function settings | |
Settings | Items | Item Description |
Channel surf | All/Favorite/ | Sets the mode to select the channel with the Channel up/down button. |
mode | Digital only/ | Favorite: Only channels registered as FAVORITE. (p. 16) |
| Analog only |
|
Language | English/ | Selects the screen menu language. |
| Español/ |
|
| Français |
|
Clock |
| Adjusts the clock. (p. 14) |
ANT/Cable setup See p.
Input labels | Selects the terminal and label of the external equipment. |
(Display labels | Devices connected to external input terminals can be labeled for easier identification during the |
of connected | input selection. (Input select (p. 19)) |
devices) | Terminals: HDMI |
| Label: [BLANK] Not |
| CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/ |
| OTHER |
•You can also enter the label name directly. (Entering characters (p. 17)) VIERA Link settings See p.
ECO/energy | Power save | Reduces screen brightness to lower power consumption. |
saving | (Standard/ | viewing in a dark room. |
| Saving) |
|
No signal for 10 minutes (Stay on/ Power TV off)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION continue for more than 10 minutes.
•Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.
•“No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No signal for 10 minutes”.
•The
No activity for 3 hours
(Stay on/ Power TV off)
To conserve energy, the TV automatically turns off when no operation of remote and side panel key continues for more than 3 hours.
•Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while “PC inputs” is selected.
•“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 3 hours”.
•The
Advanced setup Auto power on | Turns TV On automatically when the cable box or connected device is turned On. | ||
| (No/Yes) | TV AC cord must be plugged into this device. TV turns on every time the power is restored. | |
| Image viewer | Slideshow/ | Sets the playback type to play back SD cards automatically. |
| auto play | Thumbnail/ | Set later: “Image viewer settings” menu will be displayed repeatedly. |
|
| Set later/Off | “Viewing photos with VIERA IMAGE VIEWER” (p. 20) |
|
|
| |
First time setup | Restarts the first time setup from “Language” setting. (p. 12) | ||
About | Displays TV version and software license. | ||
Reset to defaults | Performing Reset will clear all settings made with Setup, such as channel | ||
|
| settings. |
|
|
| • Password setting/entering (p. 17) | |
34
