Viewing 3D images on TV
Precautions for Viewing 3D Images
Cautions During Viewing
Do not use devices that emit strong electromagnetic waves (such as cellular phones or personal transceivers) near the 3D Eyewear. Doing so may cause the 3D Eyewear to malfunction.
If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within the room may appear to flicker. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear.
Wear the 3D Eyewear correctly. 3D images will not appear correctly if the 3D Eyewear is worn upside down or
For comfortable viewing
View from at least the recommended distance (3 times the effective height of the screen), Recommended Distance:
For a
When the top and bottom area of the screen are blackened, such as when playing movies, view the screen at a distance 3 times further than the height of the actual image. (That makes the viewing distance closer than above recommended distance.)
Stop using the 3D Eyewear immediately if your skin feels unusual.
In rare cases, the paint or materials used in the 3D Eyewear may cause an allergic reaction.
Stop using the 3D Eyewear immediately if you experience any redness, pain, or itching on the nose or temples. Prolonged use may cause such symptoms due to excess pressure, which may result in the user feeling unwell. Use the 3D Eyewear where there is no interference from other devices with Bluetooth® signals.
Viewing 3D images
The following 3D content can be enjoyed on this TV:
•A 3D
•3D TV broadcast (program)
•3D Photo and 3D Movie taken by LUMIX/Camcorder.
•3D game played on 3D capable video game console, connected via HDMI cable.
Optional Accessories (p. 8)
*For more detail on usage of 3D Eyewear (POWER button, Accessories and how to register, etc.), please refer to operating manuals for the purchased 3D Eyewear. 3D experience differs depending on the type of 3D Eyewear.
Using the 3D Eyewear
Turn on the 3D Eyewear.
Make sure that registration is finished completely.
Put on the 3D Eyewear.
Viewing 3D images
When the HDMI receives information in which 3D mode is detected, 3D images are automatically displayed according to the signal.
If the 3D images are not displayed correctly, or if the images cause discomfort, the images can be adjusted by “3D format select” or “3D settings”.
●Change the view 3D⇔2D, 3D settings.
After Use
Turn off the 3D Eyewear.
After using the 3D Eyewear, store it in the case.
Change the view 3D⇔2D
■Simply switches 3D ⇔ 2D images (Auto mode)
3D format select | select | ● | Switches to Manual mode |
| |||
3D |
|
|
|
2D | OK |
|
|
|
|
| |
| (example) |
|
|
16
