■Assembling the pedestal
Insert the protrusion of the Neck
into the Base firmly.
Neck
Protrusion of the
Neck (bottom)
Front
Attaching the pedestal to TV
Turn the stand over and fix stand neck securely with assembly screws. (4 screws)
•Do not hold the neck when turning over the stand.
B x 4 pcs.
Hole for screw
Front
Back of Stand
Accessories
Assembly screws
A
XYN4+F10FNK (Black) size (M4 x 10) (1)
B
XYN5+F16FN (silver)
size (M5 x 16) (12)
Bracket (1)
TBL5ZA3200
Attach the Bracket to the protrusion of Neck. Make sure that the bracket is anchored before fixing the screws.
Fix securely with assembly screws (4 screws)
Protrusion of Neck (top) | B x 4 pcs. |
Bracket 
Attach the cover and fix securely with assembly screw.
A x 1 pcs.
Cover
Neck (1) 
TXFBL5Z0085
Cover (1)
TXFBL5Z0056
■Set-up
Tighten assembly screws 
(total 4 screws) loosely at first, then tighten them firmly to fix securely.
Rear side
Cover is in the same bag with Owner’s Manual
Base (1) 
TBL5ZX0421
Arrow mark
Hole for pedestal installation
B x 4 pcs. |
Bracket
Base 
Work on a flat surface
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
Remove the assembly screws 
from the TV.
Lift the TV from the pedestal.
Remove the assembly screw 
from the cover.
Pull out the cover.
Remove the assembly screws 
from the Bracket. 
Remove the assembly screws 
from the Back of stand and pull out the neck.
Warning
Do not disassemble or modify the pedestal.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)
Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.
8
