51
To enjoy program repeat play
If REPEAT MODE is pressed during program play (see page
52), the display changes as follows:
To return to program play
Press REPEAT MODE until “
OFF
” is displayed.
Program play
Repeat of programmed track
being played
Repeat of all programs
Cancel repeat mode
(Program play)
T PRG
A PRG
OFF
OFF
PRG
A
A
•
2Press A-B REPEAT at the point where
repeat play is to be concluded (B).
A B
A B
Repeat play of the section between points A and B starts.
To return to normal play
Press A-B REPEAT until “
• •
” is displayed.
Note
• A-B repeat play does not work with an interactive DVD.
• Some subtitles recorded around point A or B may fail to appear
(DVD).
• A-B repeat play works only within a title (DVD) or a track (Video
CD/CD).
For your reference:
• The end of a track or title is automatically determined as point B.
∗
∗
1 2 3 4
Storing markers in memory to beviewed (listened to) again
Repeating sections between two
specific points ( A-B repeat )
1Press A-B REPEAT during play at the point
where repeat play is to start (A).
Note
•
Some subtitles recorded around the marker may fail to appear. [DVD]
• These operations do not work with an interactive DVD or during
menu play of a Video CD with playback control.
For your reference:
• All the markers are cleared when the player is set to the standby
mode or turned off, or OPEN CLOSE is pressed.
4Press SELECT ( ) button to recall a marker.
or
Press CANCEL to clear a marker.
Play resumes from the point corresponding to the selected marker.
or
The selected marker is cleared.
∗
∗
1 2 3 4
3
Press SELECT ( , ) button to select the
marker to be recalled/cleared.
1Press the DISPLAY during play to display
the Disk information.
2
Recalling / clearing a marker
Press SELECT ( , ) button to select the
marker item.
• Press select ( ) key and press ENTER to store the next marker.
• Up to 5 markers can be stored in the memory.
• Press MARKER to clear the display.
∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
1
Indicates “MARK 1” is stored in the
memory.
(If ENTER is pressed where any
number is already displayed, the
previous starting point will be
replaced by the new one.)
3Press SELECT during play at the starting
point to be viewed (listened to) again.
2
Press SELECT ( , ) button to select the marker item.
The marker screen appears
on the TV monitor.
“ ” indicates no marker has
been stored yet.
1Press the DISPLAY during play to display
the Disk information.
Storing a marker in the memory
∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗