Using the TV controls, Photo mode, Aspect

Using the TV controls

INPUT/	1
OK/
HOLD
for
MENU
CH	2
	2
Indicators on the TV

Using the Media Player

Media Player allows you to enjoy photo, music or video recorded on a USB Flash Memory.

ƔThe picture may not appear correctly on this TV

depending on the digital cameras used.

ƔDisplay may take some time when there are many files

and folders in the USB Flash Memory.

Follow the operation guide to perform available operations in Photo mode.

To display / hide the operation guide during	INFO
To display / hide the operation guide during
[Single View] and [Slideshow]

[View]

Enters Single view mode to view photo one at a time

To playback the selected file only

Select the folder

Select the file

Play

[Option Menu]

	Using the Menu	Sets the overall colour tone of the picture.
		[Colour Balance]
	Functions	[Cool] / [Normal] / [Warm]
		ƔNot valid when [Viewing Mode] is set to [True Cinema]

	1 Display the menu	[Channel Colour Set]
		Adjusts the suitable colour density from 3 levels for each
	MENU	channel.
		ƔSelect the channel to adjust and set this function.

[Speaker Distance to Wall]

Compensates for the low frequency sound due to the distance between the speakers and the wall

[Over 30cm] / [Up to 30cm]

ƔIf the back space between the TV and wall is over 30 cm, [Over 30cm] is recommended.

ƔIf the back space between the TV and wall is within 30 cm, [Up to 30cm] is recommended.

[System Menu]

Ŷ[Shipping Condition]

Resets all settings to the original condition.

– Access this function and follow the on-screen

instructions to complete the procedures.

– Initial Setup will automatically start after [Shipping

Condition] completes (p. 6).

			VOL	3
				3
5	6	7		4
5	6	7

1Displays [Input Selection] screen

ƔOn first press, the [Input Selection] screen for control panel is displayed. Pressing the button again will toggle cursor movement.

Displays [Main Menu] when press and hold for 3 seconds

Confirms selection (OK button) while in the menu system

2Channel Up / Down Cursor Up / Down

ƔMakes selections or adjustments when in the menu system

3Volume Up / Down Cursor Left / Right

ƔMakes selections or adjustments when in the menu system

4Switches TV On or Standby

ƔTo completely turn Off the TV, remove the mains plug from the wall socket.

5Remote control signal receiver

6C.A.T.S. (Contrast Automatic Tracking System) sensor

ƔSenses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On].

(p. 10)

7Power LED

ƔRed: Standby

Green: On

Watching External Inputs

Connect the external equipment (p. 5 - 6), then select the input corresponds to the connected terminal.

Input Selection

AV1

AV2

HDMI 1

HDMI 2

USB

Note

Ɣ[USB] : Switches to Media Player (p. 8)

ƔYou can label or skip each input mode (except [USB]).

“Input Labels” (p. 11)

Skipped inputs will not be displayed when the AV button is pressed.

ƔPartly degraded files might be displayed at a reduced

resolution.

ƔThe folder and file names may be different depending on

the digital camera used.

ƔIf a non-standard file is played, the TV might misoperate.

To recover, switch the Mains Power Off, then On again.

1Insert the USB Flash Memory

ƔInsert or remove

USB	straightly and completely.

2Start Media Player

MEDIA

PLAYER

3Select the mode

Contents Select
EXIT
Select
RETURN
Access	Photo	Music	Movie
USB

[Photo]: Displays the thumbnail of all photos in the USB device.

[Music]: Displays the thumbnail of music folders in the USB device.

[Movie]: Displays the thumbnail of video titles in the USB device.

[Contents Select]

Switching between modes

When you are in the thumbnail view of any mode, you change to the other mode by returning to the [Contents Select] screen.

Photo mode

Media Player	Photo	All photos

View	EXIT	Info	USB
Select	RETURN	Option Menu
Slideshow	View Select	Drive Select	Contents Select

Operation guide

: Error display

[Slideshow]

Lets you view all photos in the slideshow mode

[View Select]

Lets you toggle between thumbnail view and folder view.

[Option Menu]

Contains [Slideshow Settings] menus to set up slideshow.

ŶTransition Effect

Effect for photo switching during slideshow

[None] / [Dissolve] / [Wipe right] / [Wipe left] / [Wipe up] / [Wipe down] / [Box in] / [Box out] / [Random]

ŶScreen Mode

Screen mode for Single view and Slideshow

[Normal] / [Zoom]

–Depending on the photo size, it may not be fully enlarged to ¿ll the screen, e.g. portrait style picture.

ŶInterval

Slideshow interval [5] / [10] / [15] / [30] / [60] / [90] / [120] (seconds)

ŶRepeat

Slideshow repeat [Off] / [On]

ŶBack Ground Music

Background music during photo viewing

[Off] / [Type1] / [Type2] / [Type3] Note

ƔPicture quality may suffer depending on the slideshow settings.

ƔPicture setting may not work depending on the slideshow settings.

Music mode

Media Player	Music	Folder view
My Music_1 My Music_2	My Music_3

Access	EXIT	Info	USB
Select	RETURN	Option Menu
Play Folder		Drive Select	Contents Select

Operation guide

Follow the operation guide to perform available operations in Music mode.

To display / hide the operation guide during	INFO
To display / hide the operation guide during
playback
To playback all music in the selected folder
R

Contains [Music Setup] menu to set up play mode.

ŶRepeat

[Folder]: Playback repeat within the selected folder

[One]: Playback repeat on the selected one file

[Off]: Playback repeat off

Movie mode

Media Player

Movie

Title view

Trip1	Trip2	Trip3	Trip4	Trip5	Room	Nature1
Nature2	Nature3	Nature4	Nature5	Nature6	2010_4	2010_7

2010_9			USB
Access	EXIT	Info	USB
Select	RETURN	OPTION Option Menu	Contents Select
Play Folder		Drive Select	Contents Select

Operation guide : Error display

Follow the operation guide to perform available operations in Movie mode.

To display / hide the operation guide and		INFO
To display / hide the operation guide and
information banner during playback
To playback all movies in the selected title folder
R
To playback the selected file in the title folder
Select the title	Select the file	Play
		R
OK	OK	R
OK	OK

[Option Menu]

Contains [Video Setup] menus to set up Movie mode. While in thumbnail view:

ŶRepeat

Playback repeat within the title [Off] / [On]

–Only the selected folder will be repeated.

During movie playback:

ŶMulti Audio

Selects the sound tracks (if available)

ŶSubtitle

Selects the subtitle (if available)

[Off] / [Subtitle1] (/ [Subtitle2] ...)

ŶAspect Change

[16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] / [Zoom2] / [Zoom3]

–You can also change the aspect using the ASPECT button.

2Select the menu

Main Menu

Picture

Sound

Setup

3Select the item you want, then change / adjust or access

Example:

Picture Menu		1/2
Viewing Mode	Dynamic		Select
Backlight		100	Select
Backlight		100	OK
Contrast		50	OK
Contrast		50
Brightness		0
Colour		50

ƔChange the setting option

Viewing Mode	Dynamic		Change /
ƔAdjust the intensity bar		OK
			adjust
Contrast		50

ƔAccess the submenu
Child Lock	Access	OK
			Access

Note

ƔA different menu will be displayed in the mode of Media Player (p. 8 - 9).

ƔOnly available items can be selected.

Picture Menu

[Viewing Mode]

Sets preset picture mode for each input. [Dynamic]: Improves contrast and sharpness. [Normal]: For viewing in a normal lighting condition. [Cinema]: Improves the performance of contrast, black and colour reproduction.

[True Cinema]: Reproduces the original image quality precisely without any revision.

[Game]: For viewing when playing games

–Not valid on TV mode.

–To display a continuous record of time spent using Game mode [Playing Time Display] (p. 11).

In each Viewing Mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored for each input.

[Backlight] / [Contrast] / [Brightness] / [Colour] /

[Sharpness]

Adjusts the levels of these options to your preference.

[Tint]

Adjusts the picture hue.

ƔFor NTSC signal, Component or HDMI input

[Eco Mode]

Automatic Brightness Control function

Adjusts picture settings automatically depending on ambient lighting conditions [Off] / [On]

[P-NR] (Picture Noise Reduction)

Reduces unwanted picture noise and flicker noise in the contoured parts of a picture [Off] / [Min] / [Mid] / [Max]

[3D-COMB]

Makes still or slow moving pictures more vivid [Off] / [On]

ƔOccasionally, while viewing still or slow moving pictures, colour patterning may be seen. Set to [On] to display sharper and more accurate colours.

ƔFor PAL or NTSC signal reception only.

ƔNot valid on Component, HDMI and Media Player.

[Reset to Defaults]

Press OK to reset the present picture [Viewing Mode] of the selected input to the default settings.

Sound Menu

[Mode]

Sets preset sound mode. The selected mode affects all input signals.

[Music]: Improves sound quality for watching music videos, etc.

[Speech]: Improves sound quality for watching news, drama, etc.

[User]: Adjusts the sounds manually by using the equaliser

–For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and [Treble]. Select [Equaliser] and adjust the frequency (below).

In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those settings will be stored for each mode.

[Bass] / [Treble]

Adjusts the effect to your preference.

[Equaliser]

Select the frequency and change the frequency level by using the cursor buttons.

ƔThis function is available when [Mode] is set to [User].

ƔTo enhance the bass sound, raise the level of the lower frequency. To enhance the treble sound, raise the level of the higher frequency.

ƔTo reset the levels of each frequency to the default settings, select [Reset to Defaults] by using the cursor button, and then press the OK button.

[Balance]

Adjusts volume level of right and left speakers

[Surround]

Surround sound settings [Off] / [On]

[Auto Gain Control]

Automatically regulates large sound level differences between channels and inputs [Off] / [On]

[Volume Correction]

Adjusts the volume of individual channel or input mode

[MPX]

Selects multiplex sound mode (if available) [Stereo]: Use this normally

[Mono]: When stereo signal cannot be received

[M1] / [M2]: Available while mono signal is transmitted

[HDMI1/2 Input]

Selects to fit the input signal (p. 12)

[Digital]: When sound is carried via the HDMI cable connection

[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable connection

ƔFor HDMI input

[Reset to Defaults]

Press OK to reset the present settings of [Mode], [Balance] and [Surround] to the default.

Setup Menu

[Off Timer]

Sets the time until the TV automatically goes to Standby mode [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)

[Child Lock]

Locks channels / AV input modes

Enter the PIN number (4 digits) to access.

First setting:

On the [Child Lock-PIN Entry] screen, enter your preferred number twice to create the PIN.

Ŷ[Change PIN]

Lets you change your PIN number.

–Enter a new PIN number twice.

–Performing [Shipping Condition] erases the PIN number and all settings.

Ŷ[Child Lock List]

Displays the Child Lock List.

–From the list, selects the channel / input to be locked.

[Tuning Menu]

(p. 11)

[OSD Language]

Changes language for on-screen displays (p. 6)

[Display Settings]

Ŷ[Input Labels]

Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in [Input Selection] (p. 8) or banner

–To skip the input mode, select [Skip].

Ŷ[Banner Display Timeout]

Sets how long the Information banner stays on screen

(p. 7) [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] /

[7]/ [8] / [9] / [10] (seconds)]

Ŷ[Playing Time Display]

Set to [On] to display a continuous record of time spent using Game mode every 30 minutes [Off] / [On]

–This function is available when [Viewing Mode] is set to [Game].

Ŷ [Software Licence]

Displays the software licence information of the TV.

Ŷ[System Information]

Displays the system information of the TV.

Ŷ[Software Update]

Downloads new software to this TV.

–This function is only available when the TV detects software via USB.

[Other Settings]

Ŷ[AV Colour System]

Selects optimum colour system based on video signals in AV mode [Auto / PAL / SECAM / M.NTSC / NTSC]

Ŷ[Auto Standby]

Sets the duration of time that the TV will remain on when no operation is performed [Off] / [2] / [4] (hours)

–Automatic input switching with the connected equipment affects this function and time-count will be reset.

–The noti¿cation message will appear 3 minutes before going into Standby mode.

Ŷ[Power Save]

Reduces brightness of picture to economise on power consumption [Off] / [On]

Ŷ[16:9 Overscan]

Selects the screen area displaying the image

–[On]: Enlarges the image to hide the edge of the image.

–[Off]: Displays the image in the original size.

•Set to [On] if noise is generated on the edge of the screen.

•This function is available when aspect is set to [16:9].

•This function can be memorised separately for SD (Standard definition) and HD (High definition) signals.

Using the [Tuning Menu]

[Tuning Menu] lets you retune your TV, skip unwanted channels, etc.

TV mode only

[Channel List Edit]

Hides unwanted channels. The hidden channels cannot be displayed except in this function.

Select a channel, then reveal / hide

Channel List Editor

: [reveal]

: [hide] (skip)

Ŷ[Tune]

Retunes each channel (Manual Tuning).

Ŷ[Reveal all]

Reveals all hidden channels.

[Auto Tuning]

ŶMusic:

MP3 (.mp3) / AAC (.m4a)/ WMA (.wma)

ŶDVI connection

No image is displayed

Specifications

Receiving systems / Band name

Maintenance

Licence

Scans and stores all channels automatically.

Auto Tuning

All tuning data will be erased

Start Auto Tuning

EXIT

RETURN

ƔIf tuning has not been done completely

[Manual Tuning] (below)

[Manual Tuning]

Scans and stores channels manually.

Manual Tuning


1			CH57
Fine Tuning	0%			100%
Manual Tuning

Sound System
		B/G
AV Colour System		Auto

1	Set [Sound System] and [AV Colour System].
2	• Normally set [AV Colour System] to [Auto].
2	Select a channel position to store the channel.
	• If a VCR is connected only with the RF cable, select

ŶVideo

AVI (.avi) / MKV (.mkv)/ASF (.asf, .wmv) / MP4 (.mp4) / FLV (.flv) / 3GPP (.3gp, .3g2) / TS (.ts) / PS (.vob, .vro)

Copy-protected files cannot be played back.

WMA Pro and WMA Lossless are not supported.

Note

ƔEven if these conditions are fullfilled, some files may not be played back depending on how they are encoded.

ƔDo not use two-byte characters or other special codes for data.

ƔThe device may become unusable with this TV if the file or folder names are changed.

Aspect

Ŷ[16:9]

Directly displays the image at 16:9 without distortion (anamorphic).

Ŷ[14:9]

If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable. When the DVI to HDMI adaptor cable is used, connect the audio cable to the audio input terminal (use AV1 audio terminals).

Note

ƔAudio settings can be made on [HDMI1 / 2 Input] in the Sound Menu (p. 11).

ƔThese HDMI connectors are “type A”.

ƔThese HDMI connectors are compatible with HDCP (High- Bandwidth Digital Content Protection) copyright protection.

ƔEquipment having no digital output terminal may be connected to the input terminal of component or video to receive analogue signals.

USB Flash Memory

For playing back in Media Player Format: FAT16, FAT32 Compliance:

Supports only USB1.1 or USB2.0 standard. Maximum USB capacity supported is 16GB.

Î Check the settings of [Contrast], [Brightness] or [Colour]

in the Picture Menu (p. 10).

Î Check the TV is in AV mode. If the TV is in AV mode,

check the selected input mode match the output of the

external equipment (p. 8).

Blurry or distorted image

(no sound or low volume)

ÎResets channels [Auto Tuning] or [Manual Tuning] (p. 12)

Unusual image is displayed

ÎTurn the TV off with Mains power On / Off switch, then turn it on again. If the problem persists, initialise all settings [Shipping Condition] (p. 11)

Pictures from equipment connected via HDMI are unusual

ÎCheck the HDMI cable is connected properly.

ÎTurn the TV and equipment off, then turn them on again.

ÎCheck an input signal from the equipment (p. 12).

ÎUse equipment compliant with EIA/CEA-861/861D.

Model no.

TH-32A300M

Power source

AC Auto 110 - 240V, 50/60 Hz

Power consumption (Rated power / Standby power)

63 W / 0.35 W

Display panel

Panel

TFT LCD Module with LED Backlight

Visible screen size (diagonal)

80 cm

Display resolution

1,366 (W) × 768 (H)

Dimensions (W × H × D)

17Systems Systems

1PAL B, G, H

2PAL I

3PAL D, K

4SECAM B, G

5SECAM D, K

6SECAM K1

7NTSC M

(NTSC 3.58/4.5 MHz)

8NTSC 4.43/5.5 MHz

9NTSC 4.43/6.0 MHz

10 NTSC 4.43/6.5 MHz

11NTSC 3.58/5.5 MHz

12 NTSC 3.58/6.0 MHz

13 NTSC 3.58/6.5 MHz

14 SECAM I

15PAL 60 Hz/5.5 MHz

16PAL 60 Hz/6.0 MHz

17PAL 60 Hz/6.5 MHz

Function

Reception of broadcast transmissions and Playback from Video Cassette Tape Recorders

Playback from Special VCR’s or DVD

Playback from Special Disc Players and Special VCR’s or DVD

First, remove the mains plug from the socket outlet.

Regular care

ƔGently wipe the surface of the display panel, cabinet and pedestal by using a soft cloth.

ƔWipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.

For stubborn dirt

First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture.

Caution

ƔDo not use a hard cloth or rub the surface too hard as

this could scratch the surface.

ƔDo not subject the TV’s surfaces to water or detergent.

Liquid inside the TV could lead to product failure.

ƔDo not subject the surfaces to insect repellent, solvent,

This product incorporates the following software:

(1)the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0) and/or,

(2)open sourced software other than the software licensed under the GPL.

The software categorized as (1) - (2) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the “Software License” menu on this product.

At least three (3) years from delivery of this product, Panasonic Corporation will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0 or the other licenses

3	channel position [0].
3	Start tuning.
4	• Tuning stops when a channel is found.
4	Press OK to store the channel or press the cursor
	button to continue tuning.

Ŷ[Fine Tuning]

Refines the tuning of a channel.

Additional Information

Auto power standby function

The TV will automatically go into Standby mode in the following conditions:

ƔNo signal is received and no operation is performed for 30 minutes in Analogue TV mode.

Ɣ[Off Timer] is active in the Setup Menu.

ƔNo operation is performed for the period selected in [Auto Standby] (p. 11).

Input signal that can be displayed

Signal name

COMPONENT HDMI

525 (480) / 60i, 60p

625 (576) / 50i, 50p

750 (720) / 60p, 50p

1,125 (1,080) / 60i, 50i

1,125 (1,080) / 60p, 50p, 24p

Mark : Applicable input signal

ƔSignals other than above may not be displayed properly.

ƔThe above signals are reformatted for optimal viewing on your display.

Supported file format in Media Player

ŶPhoto:

JPEG (.jpg, .jpeg)

–Supported image resolution: 8 × 8 to 30,719 × 17,279

–DCF and EXIF standards

–Sub-sampling: 4:4:4, 4:2:2, 4:2:0

–Progressive JPEG is not supported.

Displays the image at the standard 14:9 without distortion.

Ŷ[Just]

Displays a 4:3 image full-screen. Stretching is only noticeable at the left and right edges.

Ŷ[4:3]

Displays the image at the standard 4:3 without distortion.

Ŷ[4:3 Full]

Displays a 4:3 image enlarged horizontally to fit the screen.

ƔHD signal only

Ŷ [Zoom1]

Displays a 16:9 letterbox or 4:3 image without distortion.

Ŷ [Zoom2]

Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.

Ŷ [Zoom3]

Displays a 2.35:1 letterbox (anamorphic) image full-screen without distortion.

At 16:9, displays the image at its maximum (with slight enlargement).

HDMI connection

This TV incorporates HDMI™ technology. HDMI (high- definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non- compression standard.

HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment.

ŶApplicable HDMI features

ƔInput audio signal:

2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)

ƔInput video signal:

“Input signal that can be displayed” (p. 12) Match the output setting of the digital equipment.

USB Hub or card adapter is not supported.

Note

ƔData modified with a PC may not be displayed.

ƔDo not remove the device while the TV is accessing data. Otherwise this can damage the device or TV.

ƔDo not touch the pins on the device.

ƔInsert the device in the correct direction. Otherwise this can damage device or TV.

ƔElectrical interference, static electricity, or erroneous operation may damage the data or device. Panasonic is not liable for any deterioration or damage of data or device during operations with the TV.

ƔIt is recommended to connect the USB Flash Memory directly to the TV’s USB port.

ƔSome USB devices or USB HUB may not be used with this TV.

ƔYou cannot connect any devices by using USB card reader.

ƔAdditional information for USB devices may be on the following website. (English only) http://panasonic.jp/support/global/cs/tv/

Troubleshooting

Before requesting service or assistance, please follow these simple guides to resolve the problem.

If an error message appears, follow the message’s instructions.

If the problem still persists, please contact your local Panasonic dealer for assistance.

Screen

Red, blue, green or black spots on the screen

ÎThis is the characteristic of liquid crystal panels. The liquid crystal panel is built with very high precision technology. Occasionally, a few non-active pixels may appear on the screen as points of red, green, blue or black. This does not affect the performance of your TV and it is not a quality problem.

Chaotic image, noisy

ÎSet [P-NR] in the Picture Menu to remove noise (p. 10).

ÎCheck nearby electrical products (car, motorcycle, fluorescent lamp).

Sound

No sound is produced

ÎCheck the sound mute setting (p. 7) and volume.

Low level or distorted sound

ÎSound signal reception may be deteriorated.

ÎSet [MPX] (p. 11) in the Sound Menu to [Mono].

Sound output via HDMI connection is unusual

ÎSet the sound setting of the connected equipment to “2ch L.PCM”.

ÎCheck the [HDMI1 / 2 Input] setting in the Sound Menu (p. 11).

ÎIf digital sound connection has a problem, select analogue sound connection (p. 13).

General

The TV goes into Standby mode

ÎThis TV is equipped with auto power standby function (p. 12)

The remote control does not work or is intermittent

ÎReplace the batteries (p. 3).

ÎPoint the remote control directly at the remote control signal receiver of the TV (within about 7 m and 30 degree angle).

ÎSituate the TV away from sunshine or block sources of bright light from shining on the remote control signal receiver of the TV.

Parts of the TV become hot

ÎEven if the temperature of parts of the front, top and rear panels has risen, these temperature rises do not cause any problems in terms of performance or quality.

The LCD panel moves slightly when it is pushed with a finger

Clattered sound might be heard

ÎThere is some flexibility around the panel to prevent damage. This is not a malfunction.

Overcurrent error message appears

ÎThe connected USB device might cause this error. Remove the device and turn the TV off with Mains power On / Off switch, then turn it on again.

ÎCheck foreign objects are not inside the USB port.

741 mm × 515 mm × 184 mm (With Pedestal) 741 mm × 450 mm × 78 mm (TV only)

Mass

7.0 (With Pedestal)

6.0 (TV only)

Connection terminals

AV1 IN (COMPONENT / VIDEO)

VIDEO

RCA PIN Type × 1, 1.0 V[p-p] (75 :)

AUDIO L - R

RCA PIN Type × 2, 0.5 V[rms]

1.0V[p-p] (including synchronisation)

PB, PR

±0.35 V[p-p]

AV2 IN

VIDEO

RCA PIN Type × 1, 1.0 V[p-p] (75 :)

AUDIO L - R

RCA PIN Type × 2, 0.5 V[rms]

HDMI 1 / 2 input

TYPE A Connectors

USB

USB 2.0 TYPE A Connectors

DC 5 V, Max. 500 mA

AUDIO OUT

RCA PIN Type × 2, 0.5 V[rms]

Sound

Audio output

10 W (5 W + 5 W)

Receiving channels

VHF BAND

2-12 (PAL/SECAM B, K1)

0-12 (PAL B AUST.)

1-9 (PAL B N.Z.)

1-12 (PAL/SECAM D)

1-12 (NTSC M Japan)

2-13 (NTSC M USA)

UHF BAND

21-69 (PAL G, H, I/SECAM G, K, K1) 28-69 (PAL B AUST.)

13-57 (PAL D, K)

13-62 (NTSC M Japan)

14-69 (NTSC M USA)

CATV

S1-S20 (OSCAR)

1-125 (USA CATV)

C13-C49 (JAPAN)

S21-S41 (HYPER)

Z1-Z37 (CHINA) 5A, 9A (AUST.)

Aerial input

VHF / UHF

Operating conditions

Temperature

0 °C - 40 °C

Humidity

20 % - 80 % RH (non-condensing)

Note

ƔDesign and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

thinner or other volatile substances. This may degrade

surface quality or cause peeling of the paint.

ƔThe surface of the display panel is specially treated and

may be easily damaged. Take care not to tap or scratch

the surface with your fingernail or other hard objects.

ƔDo not allow the cabinet and pedestal to make contact

with a rubber or PVC substance for a long time. This may

degrade surface quality.

with the obligation to do so, as well as the respective copyright notice thereof.

Contact Information: cdrequest@unipf.jp

The source code and the copyright notice are also available for free in our website below.

http://www.unipf.jp/dl/ATV13AM/

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

12				13						14				15

Using the TV controls

Using the Media Player

[View]

Functions

1 Display the menu

Watching External Inputs

3Select the mode

[Contents Select]

Photo mode

Music mode

Movie mode

3Select the item you want, then change / adjust or access

Picture Menu

Sound Menu

Setup Menu

Using the [Tuning Menu]

[Channel List Edit]

Maintenance

Licence

[Manual Tuning]

Aspect

USB Flash Memory

Unusual image is displayed

Pictures from equipment connected via HDMI are unusual

Display panel

Dimensions (W × H × D)

For stubborn dirt

Additional Information

Auto power standby function

Input signal that can be displayed

Supported file format in Media Player

HDMI connection

Troubleshooting

Screen

Red, blue, green or black spots on the screen

Chaotic image, noisy

Sound output via HDMI connection is unusual

The remote control does not work or is intermittent

Parts of the TV become hot

Overcurrent error message appears

Connection terminals

Receiving channels

Operating conditions