Options Adjustments
Options | 2/3 |
| Enable |
|
|
|
|
Initial Power Mode | Normal |
|
|
|
|
ID select | 0 |
|
|
|
|
Remote ID | Off |
|
|
|
|
Serial ID | Off |
|
|
|
|
Display size | Off |
|
|
|
|
Studio W/B | Off |
|
|
|
|
Studio Gain | Off |
Item | Effect |
|
|
|
|
|
| Adjustments | ||||
|
| Enable: | Enables the | |||||||||
|
| Disable: Disables the | ||||||||||
function | Enable | Disable | ||||||||||
|
|
| Note: When “Disable” is set, the | |||||||||
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| Normal | Standby | On | |||||||
|
|
| Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again. | |||||||||
Initial Power |
|
| Normal: Power returns in as the same state as before the power interruption. | |||||||||
Mode |
|
| Standby: Power returns in standby mode. (Power Indicator : red/orange) | |||||||||
|
|
| On: |
| Power returns in power On. (Power Indicator : green) | |||||||
|
|
| Note: |
| When using multiple displays, “Standby” is preferred to be set in order to reduce a power load. | |||||||
|
|
|
|
|
|
|
|
|
| |||
|
|
| Sets panel ID number when panel is used in “Remote ID” or “Serial ID”. | |||||||||
ID select |
|
| Set value range: 0 - 100 |
|
|
|
|
| ||||
|
|
| (Standard value: 0) |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| ||
Remote ID |
|
| Off: | Disables ID remote control functions. You can use normal remote control operations. | ||||||||
Off | On | On: Enable ID remote control functions. | ||||||||||
| ||||||||||||
|
|
| Sets the panel ID Control. |
|
|
|
|
| ||||
Serial ID | Off | On | Off: Disables external control by the ID. | |||||||||
| On: Enables the external control by the ID. | |||||||||||
|
|
| Adjusts the image display size on screen. | |||||||||
|
|
| Off: | Sets the normal image display size on screen. | ||||||||
|
|
| On: | Sets the image display size approximately 95 % of the normal image display. | ||||||||
|
|
|
|
| Off |
|
| On | ||||
Display size | Off | On | Notes: |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| ||||
|
|
| • This setting is valid only when the input signals are as follows; | |||||||||
|
|
| NTSC, PAL, SECAM, M.NTSC, PAL60, | |||||||||
|
|
| 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, | |||||||||
|
|
| 1250/50i (Component Video, RGB, DVI, SDI, HDMI) | |||||||||
|
|
| • This setting is invalid when two screen display, digital zoom or Multi screen is selected. | |||||||||
|
|
| • When “Display size” is set to “On”, “POS. /SIZE” adjustment cannot be used. | |||||||||
|
|
| • Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals. | |||||||||
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| Off: | Nullify all the settings adjusted. | ||||||||
Studio W/B | Off | On | On: Sets the color temperature for TV studio. | |||||||||
| Note: Valid only when the low is set as color temperature on screen adjustment. | |||||||||||
|
|
| Sharpens the contrast for a better view when a part of the image is too light to see. | |||||||||
|
|
| Off: | Disables “Studio Gain”. | ||||||||
Studio Gain | Off | On | On: | Enables “Studio Gain”. | ||||||||
| Note: This setting is valid only when the input signals are as follows: | |||||||||||
|
|
|
| Component Video, RGB (analog), SDI, HDMI | ||||||||
37
