11
Quick Start Guide Connection
ŶAttach the bands
Fastening band
Insert the spigot on the two bands into the
pedestal.
Fastening
push the tip of the band in the
direction indicated by the arrow.
Loosening
While pressing down on the
tab, gently push the tip of the
band in the direction indicated
by the arrow.
Band
Tab
ŶFixing connection cables and AC cord
How to release:
AC cord
Band
Connect power
plug to the socket
of the main body.
Fix the AC cord in
Cable clamper.
How to fix:
Fix by pushing
in till a clicking
sound is heard.
Example of “connection cable routing”
Cable
clamper
Snap open Snap shut
•Do not bundle the RF cable and AC cord together
(could cause distorted image).
•Fix cables with Cable clampers as necessary.
•When using the optional accessory, follow the
option’s assembly manual to fix cables.
Remove from the TV unit
Push both side
hooks and pull out
Cable Binding Instructions
ŶAttaching the Cable clampers
Pull up while
drawing the
knob.
CableCARDTM Connection
CableCARDTM allows you to tune digital and high definition cable channels through the cable antenna.Consult your cable company on the availability of CableCARDTM.1. Connect the cable antenna to ANT connector.
2. Turn the TV on (see page 17).
3. Set the input mode to TV (see page 29).
4. Insert the CableCARDTM (with upper side facing you) as far as
it will go into the CableCARDTM slot on the back of the TV.
Follow the messages displayed on the screen.
Note
•If you experience front panel control or remote control function hang-up when using CableCARDTM , unplug the
TV and plug it back on and try the controls again. If this condition persists, please call Panasonic Customer Call
Center for further instructions.
•Do not insert a PCMCIA card into CableCARDTM slot.
Back of the TV
Insert mark (e.g.)
Upper side of the card facing you
The CableCARDTM design varies
depending on the manufacturer.