45
Advanced
Operating Peripheral Equipment Using TimerOperating Peripheral Equipment
You can operate other manufacturers’ components using this TV’s remote control.
4
1
2Press both buttons simultaneously
for more than 3 seconds.
•Release the buttons when the equipment selection
buttons start flashing.
+
3
5
Caution
•Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
Select the equipment
with the equipment selection button
•The selected button remains lit (other buttons are not
lit).
Connect the external devices to the TV and
turn Off the external equipment
Input the equipment’s 4-digit remote
control code (p. 49-50)
Confirm the equipment with the
remote control
•The external equipment turns On.
ŶIf the equipment does not operate with
remote control
•When your equipment has a single code
Input the remote control code again
•When your equipment has multiple codes
Change the code with above and test again
(p. 49-50)
After step above, change the code and
test store
Operate the equipment with the
remote control (p. 48)
•Repeat until the code is found
•It may take many attempts before the correct
code is found
When the correct code is found
change
To find a code not listed in the code list
This procedure searches all codes and is called the “sequence method.”