SETUP for Input Signals
• SYNC
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Con rm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO:
The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
ON G:
Uses a synchronized signal on the Video G signal, which is input from the G connector.
Setting Component sync signal
Con rm that the input is set to Component input (this setting is valid only for Component input signal).
AUTO:
The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
ON Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Signals input to COMPONENT/RGB IN terminals correspond to SYNC ON G or SYNC ON Y.
• SDI THROUGH
Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
OFF ON
ON: Enables active through.
OFF: Disables active through.
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD)
is selected.
• FRAME CREATION
Automatically compensates the picture frame rate and removes juddering movements to make the images smooth.
OFF MID MAX
Note:
Depending on the contents, images may be noisy. To prevent the noise, change the setting.
• 3D REFRESH RATE
Reduces juddering or  icker of image due to lighting interference during 3D viewing.
100Hz 120Hz
Note:
This setting is disabled when “FRAME CREATION” is set to “OFF”.
• HDMI RANGE
Switches the dynamic range according to the input signal from HDMI terminal.
VIDEO(16-235) FULL(0-255) AUTO
VIDEO(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player
FULL(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer
AUTO:
Switches the dynamic range automatically between “VIDEO(16-235)” and “FULL(0-255)” according to the input signal.
Note:
This function can be set only for HDMI signal input.
53