FAQs

Problem

Actions

SD Card: On screen messages

Message

Meaning / Action

 

Insert a SD card.

Is SD Card in?

 

TV takes so long to turn on

The channel cannot be changed

The channel cannot be selected

Other

The remote control does not work

TV goes into "Standby mode"

An error message appears

Like your computer, the TV has to run a number of diagnostic and software checks before it can display any broadcast channels.

Is the TV in Teletext mode? (p. 16)

Is the channel locked? (p. 24)

Are the batteries installed correctly? (p. 6)

Has the TV been switched On?

The sleep function is activated.

The TV enters "Standby mode" about 30 min. after broadcasting ends.

Follow the message's instructions.

If the problem persists, contact the authorized Service Centre.

 

SD Card is locked

 

Unlock the SD card.

 

 

 

 

Please unlock to operate

 

 

 

 

 

 

Unlock the file in the card.

 

 

 

This file is locked

 

 

 

 

Please unlock to operate

 

 

 

 

 

 

 

 

 

This type of format is not

 

The TV does not support the format.

 

 

 

supported

 

(For the applicable formats and data, see p. 40.)

 

 

 

 

 

 

 

 

This type of card is not

 

A card not supported by the TV has been inserted.

 

 

 

supported

 

(For the supported cards, see p. 40.)

 

 

 

 

The file is broken.

 

 

 

 

Broken file

 

 

 

 

 

Cannot display image

 

 

 

 

 

 

The card memory is full.

 

 

 

 

Memory full

 

 

 

 

 

 

 

 

 

 

 

 

The card does not have enough memory to operate.

 

 

 

Not enough memory

 

 

 

 

 

 

 

 

 

 

The file is not readable.

 

 

 

 

Cannot read file

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unrecordable source

 

That channel cannot be recorded. (Recording is automatically

 

 

 

SD recording is stopped

 

stopped.)

 

 

 

 

 

Re-insert the card. If the error persists, format the card. (p. 31)

 

 

Error

 

 

 

Check card

 

 

 

 

That operation is not available during recording.

SD Card: Onscreen FrequentlyAsked

 

Card recording in progress

 

 

Please stop recording to operate

 

To continue the operation, stop recording.

 

 

 

(For example, changing channels while recording a TV

 

 

 

programme.)

 

 

 

 

 

 

Delete file?

 

Displayed when you press Red colour button to delete a

 

 

 

MPEG4 file. Press OK button to confirm deleting.

 

 

 

 

No time data

 

Since the signal does not have the time information, the date is

 

Cannot store time info

 

recorded as 01/01/2000.

 

 

messages Questions

 

 

 

 

 

 

 

 

Cautions in handling SD Card :

 

Do not remove the card while the TV is accessing data ("blue" LED

 

 

On) (this can damage card or TV).

 

 

 

 

 

 

 

 

 

 

Do not touch the pins on the back of the card.

 

 

 

 

 

Do not subject the card to a high pressure or impact.

 

 

 

Insert the card in the correct direction (otherwise, card may be

 

 

FAQs, etc.

damaged).

 

 

 

 

Electrical interference, static electricity, or erroneous operation may

Blue LED

 

damage the data or card.

 

 

 

 

 

 

WARNING: As with an small object,

 

Back up the recorded data at regular intervals in case of deteriorated

 

 

 

SD card can be swallowed by young

 

or damaged data or erratic operation of the TV. (Panasonic is not

 

children. Do not allow children to

 

liable for any deterioration or damage of recorded data.)

 

handle SD card. Please remove SD card

 

 

 

 

 

 

 

immediately after use.

 

 

44

45

Page 23
Image 23
Panasonic TH-42PX600A, TH-50PX600A warranty FAQs, etc, Other, Messages Questions, Message Meaning / Action