39
Press twice to exit from SET UP.
9SET UP for MULTI DISPLAY
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
2
3
Switch to on the right side.
Press the button on the remote control.
Press one of - , for the tens digit setting.
Press one of - , for the units digit setting.
4
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become the ID number
for the remote control.
ID Cancellation
Press button on remote control. (This has the same effect as pressing the , , buttons at the same time.)
Notes:
• Set the Remote ID “On” to operate the ID remote control.
If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.
(see page 48)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not
the same as the ID select number (see page 48).
ID remote control button operation
The operation is the same as normal remote control except for the button.
8MULTI DISPLAY SETUP ON
OFF
MULTI DISPLAY SETUP
HORIZONTAL SCALE
VERTICAL SCALE
SEAM HIDES VIDEO
A1
LOCATION
× 2
× 2
AI-SYNCHRONIZATION OFF
Press to select AI-SYNCHRONIZATION.
Press to select “OFF” , “ON”.
Adjusts brightness of displays when using MULTI DISPLAY.
The brightness depends on
each display’s setting.
Equalize the brightness of
all the displays.
OFF ON
Note:
If you set AI-SYNCHRONIZATION to ON, the following menus will be unavailable and these settings will be fi xed to the
initial values.
PICTURE menu: COLOR, TINT