Speciﬁcations | Panasonic TH-50PF11UK, TH-65PF11UK, TH-58PF11UK

Speciﬁcations

Speciﬁcations

		TH-42PF11UK		TH-50PF11UK
Power Source		110 - 127 V	AC, 50/60 Hz
Power Consumption
	Power on	525 W		605 W
	Stand-by condition	Save OFF 0.9 W, Save ON 0.5 W		Save OFF 0.9 W, Save ON 0.5 W
	Power off condition	0.1 W		0.1 W
Plasma Display panel		Drive method : AC type 42-inch,		Drive method : AC type 50-inch,
		16:9 aspect ratio		16:9 aspect ratio
Screen size		36.2” (922 mm) (W) × 20.4” (518 mm) (H)		43.5” (1,106 mm) (W) × 24.4” (622 mm) (H)
		× 41.6” (1,057 mm) (diagonal)		× 49.9” (1,269 mm) (diagonal)
	(No.of pixels)	2,073,600 (1,920	(W) × 1,080 (H))
		[5,760 × 1,080 dots]
Operating condition
	Temperature	32 °F - 104 °F (0 °C - 40 °C)
	Humidity	20 % - 80 %
Applicable signals
	Scanning format	525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i · 50p
		· 24p · 25p · 30p · 24sF, 1250 (1080) / 50i
	PC signals	VGA, SVGA, XGA, SXGA
		UXGA ···· (compressed)
		Horizontal scanning frequency 15 - 110 kHz
		Vertical scanning frequency 48 - 120 Hz
Connection terminals
	HDMI A-B	TYPE A Connector × 2
	COMPONENT/RGB IN	Y/G (BNC)		with sync 1.0 Vp-p (75 Ω)
		PB/B (BNC), PR/R (BNC)		0.7 Vp-p (75 Ω)
		AUDIO IN (RCA PIN JACK × 2)		0.5 Vrms
	PC IN	(HIGH-DENSITY MINI D-SUB 15PIN)		Y or G with sync 1.0 Vp-p (75 Ω)
				Y or G without sync 0.7 Vp-p (75 Ω)
		B/PB/CB : 0.7 Vp-p (75 Ω)
		R/PR/CR : 0.7 Vp-p (75 Ω)
		HD/VD:		1.0 - 5.0 Vp-p (high impedance)
		AUDIO IN (M3 JACK)		0.5 Vrms
	SERIAL	EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)		RS-232C COMPATIBLE
	SPEAKERS	6 Ω, 16 W [8 W + 8 W] (10 % THD)
Accessories Supplied
	Remote Control Transmitter	EUR7636070R
	Batteries	AA Size × 2
	Fixing band	TMME203 × 1
Dimensions (W × H × D)		40.2” (1,020 mm) × 24.1” (610 mm) × 3.9” (99 mm)		47.7” (1,210 mm) × 28.5” (724 mm) × 3.8” (95 mm)
Mass (weight)
	main unit only	approx. 64.0 lbs		approx. 79.4 lbs
	with speakers	approx. 72.8 lbs		approx. 88.2 lbs

Note:

Design and speciﬁcations are subject to change without notice. Mass and dimensions shown are approximate.

54

Image 54

Panasonic TH-50PF11UK, TH-65PF11UK, TH-58PF11UK, TH-42PF11UK manual Speciﬁcations

Contents

English Español High Deﬁnition Plasma Display Alta deﬁnición Pantalla de plasmaOperating Instructions Manual de instrucciones TH-42PF11UK TH-50PF11UK TH-58PF11UK TH-65PF11UK RISK OF ELECTRIC SHOCK DO NOT OPEN Important Safety Instructions Table of Contents Dear Panasonic Customer CANADIAN NOTICE FCC STATEMENTFCC CAUTION Trademark Credits Clean the power cable regularly to prevent it from becoming dusty Safety PrecautionsWhen using the Plasma Display Be sure to disconnect all cables before moving the Plasma Display Setup MaintenanceSafety Precautions / Maintenance AC Power Supply Cord Remote Control Batteries AccessoriesAccessories Supplied Check that you have the Accessories and items shown Connections AC cord ﬁxingCable ﬁxing band PC Input Terminals connection ConnectionsSignal Names for Mini D-sub 15P Connector Command SERIAL Terminals connectionSignal names for D-sub 9P connector Communication parameters HDMI connection COMPONENT / RGB connectionSLOT2 Power ON / OFF Connecting the AC cord plug to the Plasma DisplayConnecting the plug to the Wall Outlet PRESENT TIME SETUP Power ON / OFFWhen ﬁrst switching on the unit OSD LANGUAGE Selecting the input signal Initial selectionsSelecting the On-Screen Menu Language Remote control sensor Basic ControlsMain Unit Volume Adjustment SET UP button see page SOUND button see page DIRECT INPUT buttons Remote Control TransmitterBasic Controls Channel Adjustment ASPECT Controls Panasonic AUTOAll Aspect mode ASPECT Controls MULTI PIP SETUPMULTI PIP Selecting the Display Mode During Blend PIP Composite Screen Function MULTI PIPSwapping Screens Transparent Function and Insertion Function Operations on Selecting the Target Screen for OperationsSelecting the Sub Screen Position During P IN P Display the main screen During Digital Zoom, only the following buttons can be operated Digital Zoom1 Display the operation guide Select the area of the image to be enlarged Select the item Remote Control Display the menu screenOn-Screen Menu Display Unit Adjust the vertical position Adjusting POS. /SIZEAdjust the horizontal position Adjust the horizontal size Normalization Adjusting POS. /SIZEHelpful Hint NORMALIZE DYNAMIC PICTURE AdjustmentsSTANDARD CINEMA Adjustments ADVANCED SETTINGSPICTURE Adjustments Effect SOUND Adjustment SDI SOUND OUTPUT SET UP TIMER PRESENT TIME SETUP / SET UP TIMERPRESENT TIME SETUP Press to select POWER ON TIME / POWER OFF TIME SCREENSAVER For preventing image retention Setup of SCREENSAVER Time5 START setting FUNCTION selection SIDE BAR ADJUST Reduces screen image retentionSCREENSAVER For preventing image retention POWER SAVE Reduces power consumptionSIGNAL AUTO POWER OFF Addition sign Customizing the Input labelsDISPLAY ORIENTATION Selected Input Display Number locations for each arrangement SET UP for MULTI DISPLAYHow to setup MULTI DISPLAY Examples ID remote control button operation ID Remote Control FunctionSET UP for MULTI DISPLAY ID Cancellation DISPLAY MODE MULTI PIP SETUPMULTI PIP Transparent Display of the Sub Screen During BLEND PIP SET UP for PORTRAIT How to setup PORTRAIT LOCATION setting SET UP for PORTRAIT6 AI-SYNCHRONIZATION When PORTRAIT SETUP “ON” SET UP for Input Signals COMPONENT / RGB IN SELECTYUV / RGB IN SELECT 3D Y/C FILTER - For NTSC AV images SIGNAL menuSET UP for Input Signals Press to exit from adjust mode XGA MODE COLOR SYSTEM / Panasonic AUTO32 PULLDOWN If the image becomes unstable REFRESH RATE NOISE REDUCTIONAdvanced NR Displays the frequency and the type of the current input signal Input signal displaySetting RGB sync signal SYNC Options Adjustments Press to display the Setup menu Press to select “OSD Language”Press to adjust the menu Press to exit from Options menu Options Adjustments User2 Press the button on the remote control and hold for more than 5 seconds. TheNormalization button on main unit together with Weekly Command Timer Shipping condition SHIPPING Picture TroubleshootingPlasma Display panel Sound List of Aspect Modes In the case of SD signals, pictures with a 43 aspect ratio areenlarged horizontally, and displayed. This mode is suited to TY-FB11DHD is installed Applicable Input Signals∗4 The input signal is recognized as 1,125 1,080 / 60p Note Signals without above speciﬁcation may not be displayed properly Applicable Input Signals VIDEO input HDMI Command list of Weekly Command Timer Speciﬁcations Speciﬁcations In the USA and Puerto Rico FOR SERVICE CALL TOLL FREE for the U.S.A and Puerto RicoPanasonic Professional Flat Panel Display Limited Warranty Warranty WARRANTY COVERAGE PERIOD EXCEPTIONS LIMITED WARRANTY STATEMENTfor Canada Warranty ServicePage Page Executive Ofﬁce Customer’s RecordPanasonic Professional Display Company Panasonic Canada Inc