Panasonic TH-60PF30U, TH-65PF30U Using Network Function

61

Using Network Function

This unit has a network function to control the network connected display with your computer.

Note:

To use the network function, set each “NETWORK SETUP” setting and make sure to set the “CONTROL I/F SELECT”

to “LAN”. (see page 53)

When “LAN” is set, the slot power is turned on, and power indicator is lit orange under the condition of power off with

remote control (stand-by state), regardless of the “Slot power” setting. (see page 56)

Example of Network Connection

Command Control

Display (main unit, rear)

Hub or broadband router

LAN cable

(not supplied)

Notes:

• Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.

• To connect a device using 100BASE-TX, use “category 5” LAN cable.

• Touching the LAN terminal with a statically charged hand (body) may cause damage due to its discharge.

Do not touch the LAN terminal or a metal part of the LAN cable.

• For instructions on how to connect, consult your network administrator.

Network function of the unit can control the unit in the same way as serial control from a network.

Supported commands

Commands used in the serial control are supported. (see page 15)

Note:

Consult your local Panasonic dealer for detail instructions on command usage.

COMPUTER

Less

than

3.9 inch

(10 cm)

Less

than

3.9 inch (10 cm)

Ferrite core

(supplied)

Ferrite core

(supplied)

Installing the Ferrite core

Pull back the tabs

(in two places)

Wind the cable

twice

Open

Press the cable

through and close

Contents

Main Operating Instructions High De nition Plasma Display Page Important Safety Instructions Table of Contents Dear Panasonic Customer FCC STATEMENT Safety Precautions When using the Plasma Display WARNING Maintenance Setup AC Power Supply Cord If problems occur during use 3D Safety Precautions WARNING CAUTION Viewing 3D Content 3D Eyewear Use Lithium Battery Accessories Precaution on battery use Accessories Supplied Check that you have the Accessories and items shown Remote Control Batteries Connections AC cord connection and xing, cable xing AC cord xing Using the clamper Secure any excess cables with clamper as required. Speaker connection VIDEO and COMPONENT / RGB IN connection Video equipment connection HDMI connection DVI-D IN connection PC Input Terminals connection SERIAL Terminals connection Power ON / OFF Power ON / OFF Selecting the input signal Basic Controls Main Unit Basic Controls Remote Control Transmitter ASPECT Controls Digital Zoom 1 Viewing 3D images To view the 3D images Troubleshooting for 3D Eyewear Viewing 3D images Table of images that can be seen for each 3D Picture Format and the source image format 1/2 SET UP On-Screen Menu Displays Remote Control Unit PICTURE menu SET UP menu POS./SIZE menu SOUND menu Press to return to the previous menu. 1 Adjusting POS./SIZE 1 Page Adjusting POS./SIZE PICTURE Adjustments PICTURE Adjustments ADVANCED SETTINGS Picture Pro les Picture Pro les Saving pro les 1 2 3 4 5 1 Loading pro les 2 Editing pro les 1 2 3 4 1 2 3 4 5 SOUND Adjustment 1 Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU. 2 SDI SOUND OUTPUT PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP SET UP TIMER 3D SETTINGS 3D EYEWEAR 3D INPUT FORMAT LEFT/RIGHT SWAP SAFETY PRECAUTIONS SCREENSAVER SCREENSAVER (For preventing image retention) Setup of SCREENSAVER Time EXTENDED LIFE SETTINGS Reduces screen image retention Image Retention Reduction Menu Reduces screen image retention EXPRESS SETTINGS 1 2 3 Reduces screen image retention CUSTOM SETTINGS 1 2 3 4 5 1 2 3 Reduces power consumption Customizing the Input labels Selecting the On-Screen Menu Language DISPLAY ORIENTATION How to setup MULTI DISPLAY SET UP for MULTI DISPLAY 3 SET UP for MULTI DISPLAY ID Remote Control Function ID Cancellation ID remote control button operation SET UP for PORTRAIT How to setup PORTRAIT SET UP for PORTRAIT AI-SYNCHRONIZATION VIEWING AREA / LOCATION SET UP for Input Signals COMPONENT / RGB IN SELECT YUV / RGB IN SELECT 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL menu SYNC Setting RGB sync signal Setting Component sync signal SDI THROUGH FRAME CREATION NOISE REDUCTION Advanced NR Input signal display Network Setup 1 2 3 4 1 2 Options Adjustments Press to display the SET UP menu. Page Page Weekly Command Timer Page Audio input select Touch Panel settings (Settings when using Touch Panel) Using Network Function Example of Network Connection Command Control Using Network Function PJLink Protocol Unit Setup Computer Setup Using Web Browser Control Before Using Web Browser Control Access from Web Browser Using Web Browser Control Display Control (BASIC CONTROL/OPTION CONTROL Screen) TOP screen structure of the Web browser control BASIC CONTROL screen OPTION CONTROL screen NETWORK SETTING (Network Setup Screen) Using Web Browser Control Password Setting (Password Setup Screen) Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Plasma Display panel Symptoms Check List of Aspect Modes Applicable Input Signals Applicable Input Signals Shipping condition Command list of Weekly Command Timer the unit or enter the command VMT:0 to unlock Picture Mute. Speci cations <Software Information for This Product>