Technical Information
Technical
41
Stereo / Bilingual Sound Selection
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the
Stereo / Bilingual Sound Selection button.
Audio Signal STEREO MAIN
I
SUB
II
MONO
Mode Indicator
III
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast Regular broadcast
(Standard Audio)
Regular + NICAM MONO
I
(MAIN
I
) NICAM STEREO NICAM DUAL MONO
(MAIN
I
/ SUB
II
)
Mode Indicator No Indicator
IIII
A2 (German) .......Used in Australia, Malaysia etc.
Type of broadcast Regular broadcast
(Standard Audio)
BILINGUAL or DUAL MONO:
MAIN
I
/ SUB
II
STEREO
Mode Indicator No Indicator
III
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using
the stereo / bilingual sound selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
●
●
●
●