13
Please refer to drawing on Page 8 for location of Remote Control Buttons.
Remote Control Television Operation
BUTTON WHAT IT DOES
CH SEARCH
This option is used to show freeze frames of the programmes being broadcast on
all the stored channels. The images are displayed clockwise around the edge of
the screen starting from the top left corner. The current programme is displayed
in the centre of the screen. When the display gets back to the top left corner it will
overwrite the first picture with the next one in series.
The display will continue to change until any button is pressed
The Red button is used to select each programme in turn. The green button is
used to swap the main display between the current programme and the one
selected by the red button. The Blue button returns to normal viewing.
RED GREEN YELLOW BLUE
SELECT OK EXIT
Notes: Skipped channels are not shown.
When all the programmed channels have been displayed, the televi-
sion will restart the display starting from the top left corner.
DIRECT PROGRAMME NUMBER SELECTION
Single Digit Programme Numbers (0 to 9) can be accessed directly by pressing
the corresponding number on the Remote Control Transmitter.
TWO DIGIT PROGRAMME NUMBER SELECTION
To directly access Programme Numbers 10 to 99, press the “- / - -” Button fol-
lowed by the two digits required. For example, to select Programme Number 12:
The On-Screen display will be as shown:
_ _ 1_ 12
SELECT OK EXIT
6
5
4
321