HOME SET UP menu
Key | Key designation |
| Description |
F1 | SYNC PLY | Automatically compensates for the start initiated for the playback | |
| Sync play. | mode. For instance, when the VTR is set to the playback mode | |
|
| from the preroll point, it synchronizes its own phase to ensure | |
|
| that the tape arrives at the IN point after the preroll time has | |
|
| elapsed. (The function takes effect only when the front panel | |
|
| controls are used for operation.) | |
|
| ON: Sync play function operates. | |
|
| OFF: Normal playback is assumed. | |
|
|
|
|
F2 | AT PLY | FIELD: | Plays the tape field by field. |
| For switching the playback | FRAME1/ |
|
| picture in JOG/VAR. | FRAME2°1: Plays back on a frame by frame basis at the j1a to | |
|
|
| i1a speed and on a field by field basis at all other |
|
|
| speeds. If the tape material image has a scene |
|
|
| cutoff when moving from No. 2 field to No. 1 field, |
|
|
| as when editing with the No. 1 field as cutoff, use |
|
|
| FRAME 1. |
|
|
| Use Frame 2 when the No. 2 field is the scene |
|
|
| cutoff. |
F3 | PRG PLAY | Selects the variable step for program play. | |
| Program play. | FINE: | 0.1% step |
|
| COARSE: | 1.0% step |
|
|
| |
F4 | PRG PLAY | Normal playback occurs at variable speed within the range of | |
| Program play. | n5% with the variable step of the F3 key. (Initial settting is | |
|
| 0.0%.) |
|
|
| Refer to “Programmed play function”. | |
|
|
| |
F5 | CAP LOCK°2 | Selects the capstan servo lock mode during playback. | |
| For setting the capstan | 4F AUTO (8F AUTO: 1080/23p, 1080/24p, 1080/50i, 576/50i): | |
| servo lock | Assumes color frame auto lock mode. If there is any discontinuity | |
|
| in the color frame during playback, the unit locks again at a new | |
|
| color frame. |
|
|
| 4F FORCE (8F FORCE: 1080/23p, 1080/24p, 1080/50i, 576/50i): | |
|
| Assumes color frame forced lock mode. If there is any | |
|
| discontinuity in the color frame during playback, the unit | |
|
| preserves the field sequence at initial lock. | |
|
| 2F: Assumes frame lock mode. | |
|
| ≥The capstan servo lock mode can be set in AUTO (or | |
|
| MANUAL) EDIT SET UP menu. If the two settings differ, priority | |
|
| is given to the final mode setting. | |
F6 | TAPE MD. | HD.STOP: Stops the drum when the tape is loose. | |
| Tape mode when the VTR | HLF LOAD: | |
| is in standby OFF. |
|
|
|
|
|
|
F7 |
|
| |
|
|
| |
F8 | EXIT | Returns the VTR to the HOME menu screen. | |
°1 This item does not funtion when the 720/59p, 1080/23p, 1080/24p or 1080/25p format has been selected.
°2 ONoteN
In the 1080/59i format, the factory setting for this item is 2F. In the 1080/23p format, it is 8F AUTO. The fact that the factory setting differs depending on the format should be borne in mind when one format is converted into another.
– 18 –